Lucent Technologies 8411 manual Select Ring and Ringer Volume

To change a regular call into a 1	If you are using an 8411 with a display, press		Menu	and then
priority call (when you hear a	press the softkey below PCall
call waiting ringback tone)	If your 8411 does not have a display or if PCall is not
	available on your display, press	Priority
2	Wait for called party to answer
	Note: If you still receive a call waiting ringback tone, wait a
	few minutes and try again.

Select Ring (and Ringer Volume)

To select a personalized ring 1 Press Shift

• Red light goes on steadily

2Press Hold

• Red light next to Shift winks

✔

•Current ringing pattern plays and repeats every four seconds

•If your 8411 has a display, it shows the ringing pattern you are hearing, such as:

SELECT RING PATTERN: 1

3Continue to press (and then release) Hold (or, if you are using

a display set, you can also press Next

or Prev ) to cycle through all eight ringing patterns

35