Topcom 105 Before Initial use, Safety instructions, Disposal of the device environment

Topcom Magio 105

1Before Initial use

This device has been designed and manufactured to comply with the 98/482/EC rule, referent to the Pan European connection of a terminal to the Public Switching Telephone Network (PSTN) and following the established guidelines by the 1999/5/EC Directive about radio electric equipment and the reciprocal acknowledge of their conformity.

However, due to the fact that there are some differences in the PSTNs from one country to another, the verifying measurements by themselves do not set up an unconditional guarantee for an optimal working in every connection point to the PSTN of any country.

2Safety instructions

Be careful to keep these advice notes and if necessary pass them on to a third party.

•Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from a water source. Keep water away from the telephone.

•Do not use the telephone in environments where there is a risk of explosions.

•Clean the telephone with a slightly damp cloth or with an anti- static cloth. Never use cleaning agents or abrasive solvents.

3Disposal of the device (environment)

At the end of the product lifecycle, you should not throw this product into the normal household garbage but bring

the product to a collection point for the recycling of electrical and electronic equipments. The symbol on the product, user guide and/or box indicate this.

Some of the product materials can be re-used if you bring them to a recycling point. By re-using some parts or raw materials from used products you make an important contribution to the protection of the environment.

Please contact your local authorities in case you need more information on the collection points in your area.

4Buttons (see folded cover page)

1.	LCD display	8.	Memory button
2.	Delete button	9.	Direct Memory 1
3.	Up button	10.	Program button
4.	Dial button	11.	Mute button
5.	Down button	12.	Flash button
6.	Ring volume switch	13.	Redial/Pause
7.	Hook switch

5Installation

Plug the curly cable into the handset and the other end into your network provider wall socket.

6Ringer volume

The ring volume can be adjusted by means of the Ring Volume switch

(6) at the side of the phone (Hi-, Lo-).

7Last number redial

To redial the last dialled number.

Pick up the handset.

The last dialled number will be dialled automatically

18