Friedrich MR12Y1F To select Swing Operation Press the Swing button S, About Swing Operation

SWING OPERATION

Begin air conditioner operation before performing this procedure.

To select SWING Operation

Press the SWING button (Fig. 6 S).

The SWING Display (Fig. 7 a) will light.

Each time the SWING button is pressed, the swing operation will change in the following order.

Up/down swing operation Left/right swing operation

Swing operation stops Up/down/left/right swing operation

To stop SWING Operation

Press the SWING button and select STOP.

Airflow direction will return to the setting before swing was begun.

About Swing Operation

●Up/down swing: Swing operation begins using the following range according to the current airflow direc- tion.

Airflow direction is 1–4 (for cooling, dry).

With the upper airflow-direction louver in the horizontal position, the lower airflow-direction louver moves (swings) to direct airflow to a wide area.

●Left/right swing: The airflow-direction louvers move (swing) in the left/right airflow direction.

●Up/down/left/right swing: The airflow-direction louvers move (swing) in both the up/down and left/right airflow directions.

●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.

●If the SET button(Vertical) is pressed during the up/ down swing operation, the up/down swing operation will stop and if the SET button(Horizontal) is pressed during the left/right swing operation, the left/right swing operation will stop.

En-10