90564808
INTRODUCTION
INTENDED USE
Your Black & Decker inflation station is designed to be used cordless or in most vehicles from the standard 12 Volt socket to inflate car and bike tires, balls, rafts, air mattresses, swimming pool floats, etc. This product is intended for household, consumer use only.
CHARGING THE BATTERY - FIGURE A
The internal battery must be recharged for 4 to 5 hours using the AC charger provided (13).
•Insert the jack plug (9) into the socket on the front of the unit (11).
•Plug the AC charger into a 120Vac electrical outlet.
•The LED (15) on the AC charger (13) will indicate the level of charging. Red, unit charging, Green, unit charged.
•When fully charged, remove the AC charger from the power source and remove the jack plug from the unit.
Needse ds chargingcharging..
Charging.
Charging.
Fully charged.
Fully charged.
USE
HOSE AND CORD STORAGE - FIGURES B-D
•Wrap the 12v dc cord (17) around the base of the unit and snap the 12 Vdc adapter (8) into its storage location on the base of the unit (16).
•The air hose (5) is located in a storage channel around the top of the unit (fig. C), make sure the hose is snapped into the retaining clips and the lever is in the up position (fig.D).
•The pump hose (7) is stored around the center of the unit and snaps into position at both ends. The accessories are also stored on the front of the unit.
FITTING THE ACCESSORIES - FIGURES D,E,F & G
Your inflator is supplied with the standard tapered nozzles and the needle inflator nozzle, these are located on the front of the unit.
•To use the universal valve adaptor, make sure that the lever is in the up position.
•Place the valve adapter over the stem of the inflation needle or tapered nozzle (fig. D).
•Press the lever on the valve adapter down to lock it in place.
•Place the inflation needle or tapered nozzle into the item to be inflated.
Note: Always make sure that the lever is in the up position when not in use. Operate your inflator only with the universal valve adaptor or with the included nozzles.
A | 13 |
| 15 |
| 9 |
B |
|
| 8 |
| 16 |
| 17 |
C |
|
| 5 |
7 |
|
D | 19 |
| |
| 6 |
Note: Make sure that the universal valve adapter is firmly locked in place before turning the inflator on.
Your inflator is supplied with a high volume adaptor (24).
6