Hitachi C 10FCD instruction manual Specific Safety Rules for Use of this Power Tool

Page 4

English

10. ALWAYS SECURE THE WORKPIECE TO THE FENCE OR THE TABLE. Use clamps or a vise to hold the workpiece in place. It is safer than using your hand and it frees both hands to operate the tool.

11.NEVER OVERREACH. Always keep proper footing and balance when working with the tool.

12.ALWAYS MAINTAIN TOOLS WITH CARE. Always keep tools sharp and clean for the best and safest performance. Always follow instructions for lubricating the tool and for changing accessories.

13.ALWAYS DISCONNECT THE TOOL before servicing and before changing blades or other accessories.

14.NEVER RISK UNINTENTIONAL STARTING WHEN PLUGGING IN THE TOOL. Always confirm that the switch is in the OFF position before inserting the power plug into the receptacle.

15.ALWAYS USE RECOMMENDED ACCESSORIES ONLY WHEN OPERATING THIS TOOL.

Consult this instruction manual for descriptions of recommended accessories. To avoid personal injuries, use only recommended accessories in conjunction with this tool.

16.NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped or if unintentional contact with the saw blade is made.

17.ALWAYS CHECK FOR DAMAGED PARTS BEFORE USING THE TOOL. Always check the guard and all other components for damage before using the tool to assure that they will function properly. Check all moving parts for proper alignment, freedom from binding and other conditions that might affect proper operation. Always repair or replace any damaged guards or other damaged components before using the tool.

18.ALWAYS CONFIRM THE ROTATION DIRECTION OF THE BLADE BEFORE USING THE TOOL. Always feed work into the tool against the rotation direction of the blade in order to prevent possible injury.

19.NEVER LEAVE THE TOOL RUNNING WHILE UNATTENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop. Always turn the power off when the tool is not in use. Always unplug the power cord when the tool is not in use.

20.This tool was not designed to be used for mass-production applications and should not be used in mass-production environments.

21.When servicing this tool, use only authorized replacement parts.

22.Apply 115 volts AC only to this tool. Applying the wrong voltage or applying DC power can cause the POWER TOOL to operate improperly and cause serious personal injury or damage to the tool.

23.Never raise the saw blade from the workpiece until it has first come to a complete stop.

24.Always use outboard stands to provide support for long workpieces that overhang the table of the compound saw.

25.POLARIZED PLUGS To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Specific Safety Rules for Use of this Power Tool

WARNING: The following specific operating instructions must be observed when using this POWER TOOL in order to avoid injury:

DO’s

ALWAYS OBSERVE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL:

1.Review this Manual and familiarize yourself with the safety rules and operating instructions for this POWER TOOL before attempting to use it.

2.Always confirm that the POWER TOOL is clean before using it.

3.Always wear snug-fitting clothing, non-skid footwear (preferably with steel toes) and eye protection when operating the POWER TOOL.

4.Always handle the POWER TOOL carefully. If the POWER TOOL falls or strikes against a hard object, it might become deformed or cracked or sustain other damage.

5.Always cease operating the saw at once, if you notice any abnormality whatsoever.

6.Always confirm that all components are mounted properly and securely before using the tool.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Avertissement AdvertenciaContents Inportant Safety Instructions for Using ALL Power Tools Meanings of Signal WordsImportant Information Specific Safety Rules for Use of this Power Tool DON’Ts Replacement Parts USE Proper Extension CordDouble Insulation for Safer Operation Operation and Maintenance Name of PartsSpecifications 10FCDApplications InstallationPreparation Before Operation Installing the extension stay Releasing the plunger handleBefore Using Before Cutting Cutting a groove on the table insertChecking the saw blade lower limit position Oblique anglePractical Applications Installing the extension wings Optional accessorySecuring the workpiece Switch operation Using the vise assembly Standard accessoryMiter cutting procedures Using the vise assembly Optional accessoryCutting Operation Bevel cutting procedures Compound cutting proceduresCrown molding cutting procedures For miter cut settingEnglish How to use the dust bag Standard accessory Cutting easily-deformed materials, such as aluminum sashSAW Blade Mounting and Dismounting Mounting the saw bladeMaintenance and Inspection Overload Protective Device for POLY-V-BELTService and Repairs Signification DES Mots D’AVERTISSEMENT Informations ImportantesConsignes DE Sécurité Relatives AUX Outils Électriques Français Consignes de sécurité spéciales pour cet outil électrique Français Utilisation DUN Cordon DE Rallonge Pieces DE RechangeDouble Isolation Pour UN Fonctionnement Plus SUR Utilisation ET Entretien NOM DES PiècesSpécifications CordonPréparation Avant L’UTILISATION Installation de la traverse de rallonge Libérer la goupille de verrouillageAvant L’UTILISATION Avant LA Coupe Coupe d’une encoche dans la plaque d’insertionVérification de la position de limite inférieure de la lame Angle obliqueApplications Pratiques Installation des servantes accessoires en optionFixation de la pièce Utilisation de l’ensemble d’étau accessoire standard Fonctionnement de l’interrupteurCoupe Utilisation de l’ensemble d’étau accessoire en optionProcédure de coupe d’onglet Procédure de coupe de biseau Procédures de coupe mixteProcédures de coupe de corniche complexe Réglage d’une coupe d’ongletDroite 33,9 Utilisation du sac à copeaux Accessoire standard Installation ET Retrait DE LA Lame Installation de la lameEntretien ET Inspection Retrait de la lameInspection de la lame Inspecter les balais carbone et FigService APRÈS-VENTE ET Réparations Significado DE LAS Palabras Clave Información ImportanteNormas DE Seguridad Para LAS Herramientas Eléctricas Español Español Español Utilización DE UN Cable Prolongador Piezas DE ReemplazoAislamiento Doble Para Ofrecer UNA Operación MÁS Segura Operación Y Mantenimiento Nomenclatura DE PartesEspecificaciones Preparativos Previos a LA Operación AplicacionesInstalación Liberación del mango de émbolo Instalación del soporte de extensiónAntes DE LA Utilización Corte de ranura en un inserto de la mesa Antes DEL CorteÁngulo oblicuo Inmovilización de la pieza de trabajo Aplicaciones PrácticasInstalación de los soportes de extensión Accesorio opcional Operación del interruptor Operación de corte Procedimiento de corte de ingletesProcedimientos de corte en bisel Procedimientos de corte compuestoProcedimientos de corte con moldura en vértice Para el ajuste de corte de ingletesIzquierda 31,6˚ Izquierda 33,9˚ derecha 33,9˚ Forma de utilizar la bolsa para el polvo Accesorio estándar Montaje Y Desmontaje DE LA Hoja DE Sierra Montaje de la hoja de sierraMantenimiento E Inspección Desmontaje de la hoja de sierraInspección de la hoja de sierra Inspeccion las de escobillas Figs yServicio Y Reparaciones Page Page Page Page Page Page Hitachi Koki Canada Co
Top Page Image Contents