English
7.When replacing the saw blade, always confirm that the rpm rating of the new blade is correct for use on this tool.
8.Always shut off the power and wait for the saw blade to completely stop rotating before doing any maintenance or adjustments.
9.Always clamp or otherwise secure the workpiece to the fence; otherwise the workpiece might be thrust from the table and cause bodily harm.
10.During miter or bevel cutting, always wait for the rotation of the blade to stop completely before lifting the saw blade.
11.Always make a trial run first before attempting any new use of the saw.
12.Always handle the saw blade with care when dismounting and mounting it.
13.Always confirm that the workpiece is free of nails or other foreign objects before beginning a cut.
14.Always keep your hands out of the path of the saw blade.
15.Always confirm that the safety cover is in the proper place before using the saw.
16.Inspect the tool power cords periodically.
17.Always confirm that the proper lengths and types of extension cords are being utilized, if necessary, before starting the tool.
18.Always confirm that the motor air vents are fully open before using the tool.
19.Always wait until the motor has reached full speed before starting a cut.
20.Always keep the handles dry, clean and free of oil and grease. Hold the tool firmly when in use.
21.Always use outboard stands to provide support for long workpieces that overhang the table of the compound saw.
22.Always operate the tool after ensuring the workpiece is fixed properly with a vise assembly.
23.The operating instructions provided with the tool shall direct the user to secure the tool to supporting structure if, during normal operation, there is a tendency for the tool to tip over, slide, or walk on the supporting surface.
DON’Ts
NEVER VIOLATE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL:
1.Never operate the POWER TOOL unless you fully understand the operating instructions contained in this Manual.
2.Never leave the POWER TOOL unattended without first unplugging the power cord.
3.Never operate the POWER TOOL when you are tired, after you have taken any medications, or have consumed any alcoholic beverages.
4.Never use the POWER TOOL for applications not specified in the instruction manual.
5.Never operate the tool while wearing loose clothing, a necktie or jewelry, or while your hair is uncovered, to protect against getting caught in the moving machinery.
6.Never reach around the saw blade.
7.Never touch any moving parts, including the blade, while the saw is in use.
8.Never remove any safety devices or blade guards; use of the tool without them would be hazardous.
9.Never lock the safety cover; always confirm that it slides smoothly before using the tool.
10.Never damage the power cord of the tool.
11.Never attempt to move a
12.Never use the POWER TOOL if the starting switch does not turn on and off properly.
13.Never use the POWER TOOL if the plastic housing or the handle is cracked or deformed.
14.Never use the POWER TOOL near flammable liquids or gases because sparking can cause an explosion.
15.Never clean plastic components with solvents because the plastic may dissolve.
16.Never operate the saw unless all the blade guards are in place.
5