RUSKA 7350
Users Manual
2.Use the rotary knob to highlight the name of the program.
3.Press Edit [F4]. The program editing screen will appear as a table showing all of the steps.
gld22.bmp
Figure 4-20. Menu Program Edit - Menu
4.The rotary knob can be used to move through the program and highlight the value you wish to edit. Use the keyboard to enter a new value. This value will show up in the scratch pad located at the bottom of the window. Press Enter to accept the edited value.
5.To add a step to the program, first move to the step after the new step. For example, to insert a step between steps 3 and 4, move to step 4. Press Insert [F4].
6.To delete a step in the program, first move to the step to be deleted, then press Delete [F5].
7.When all changes have been made, press PREVIOUS to return to the Named Programs screen. The Calibrator automatically saves the changes that were made in the program.
Changing the Configuration Stored with a Program
1.Programs are configured from the Program Menu. From the Main Menu (press PREVIOUS until the Main Menu appears), press Menu [F6] Program [F4].
2.Use the rotary knob to highlight the name of the program.
3.Press Config [F3]. The configuration screen will appear.
4.Press Recall [F2]. The Calibrator will be set to the configuration stored with the program.