Fluke 7350 specifications Summary of Error Messages

Appendix B

Summary of Error Messages

Summary of Error Messages

Negative error numbers are from the Standard Commands for Programmable Instruments (Version 1991.0).

	Table B-1. Summary of Error Messages
Value	Description and Corrective Action
0	No Error.
-103	Invalid Separator. Check punctuation in the SCPI command.
-104	Data Type. The type of parameter data is incorrect. Check for numeric versus string
	data.
-109	Missing Parameter. No valid parameter was found for the SCPI command.
-110	Command Header. The command name is not valid.
-113	Command Unknown. The command specified does not exist.
-114	Header Suffix. The numeric suffix for the command name is out of range.
-201	Remote Required. Remote command conflicted with local interface. Return local
	interface to main Menu.
-221	Settings Conflict. The command could not be executed due to the current state of
	the Calibrator. Some commands cannot be executed while a program, self-test, or
	calibration is in progress.
-222	Out of Range. The value is not within the valid range. For pressures, check your
	high and low limits.
-281	Cannot create program. Program memory is full.
-282	Illegal Program Name. The name specified is not valid or does not exist.
-284	Program Currently Running. The command cannot be executed while a program is
	running.
-285	Program Syntax Error. The syntax of the program definition is not correct.

B-1