CARTON CONTENTS
2
3
11
1
4
5
12 | 13 | 14 |
10 | 15 | 16 |
|
|
9
17
6
73
8
18
21 | 22 | 19 | 20 |
| 23 | ||
|
|
|
1.Base
2.Column
3.(2) Rack collars
4.Rack
5.Table supports
6.Arbor
7.Table Clamp Handle
8.Belt tensioner handle
9.Table Raising and Lowering Handle
10.0 degree pin
11.Table
12.(4) M10 x 40mm Socket Head Cap Screws
13.LED Light
14.Pinion shaft handles
15.Table adjustment wrench and drift key
16.Chuck
17.Chuck key
18.(6) Hex wrenches
19.(2) Forward tilt knobs and washers
20.M6 x 1 Locknut
21.Button head screw
22.Lockwasher
23.Table tilt pointer
*Drill press head (not shown)
*Set screw for belt tension level handle (not shown)
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your machine.
To reduce the risk of injury, always use at least two people when lifting.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
7