HP SP 3300 manual Finding more information, Setting up the hardware

Finding more information

You can find information for setting up and using your printer from the following resources, either printed or onscreen.

Setting up the hardware

This section shows the steps to set up the hardware which is explained in the Quick Install Guide. Make sure you read Quick Install Guide and complete following steps.

Quick Install

Guide

quick install guide

1				3	1	2	3
					4	5	6
2				4
	1	2	3
	4	5	6	5

6

Provides information on setting up your printer, therefore, be sure to follow the instructions in the guide to get the printer ready.

1Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays.

The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table.

Online User’s	Provides you with step-by-step instructions for
Guide	using your printer’s full features, and contains
	information for maintaining your printer,
	troubleshooting, and installing accessories.
	This user’s guide also contains a Software
	Section providing you with information on how
	to print documents with your printer on various
	operating systems, and how to use the
	supplied software utilities.

	Note
	You can access the user’s guides in other
	languages from the Manual folder on the
	supplied CD-ROM.
Printer Driver	Provides you with help information on printer
Help	driver properties and instructions for setting up
	the properties for printing. To access a printer
	driver help screen, click Help from the printer
	properties dialog box.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing. See page 1.5 for more information.

1.4 <Introduction>