HP SP 3300 manual Bonjour, Configuring UPnP, Using UPnP, Network print server

Page 92

In the network print server

1Configure the WINS server address through Web Image Monitor SP 3300 Series.

2Reboot the print server.

The WINS server will update the printer's NetBIOS name in its database. Users can use the printer name instead of its IP address.

Bonjour

Bonjour allows for a network system to be easily discovered and its capabilities to be revealed by any Bonjour-compliant client software, such as Print Center Utility built in to Mac OS X. For details, see page 5.2.

UPnP

UPnP is an architecture for pervasive peer-to-peer network connectivity of intelligent appliances, wireless devices, and PCs of all form factors. It is designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public spaces, or attached to the Internet.

UPnP is a distributed, open networking architecture that leverages TCP/ IP and Web technologies to enable seamless proximity networking in addition to control and data transfer among networked devices in the home, office, and public spaces.

UPnP is more than just a simple extension of the plug and play peripheral model. It is designed to support zero-configuration, “invisible” networking, and automatic discovery for a wide breadth of device categories from a wide range of vendors. This means a device can dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and DNS servers are optional and are used only if available on the network, while a device can leave a network smoothly and automatically without leaving any unwanted state issues behind.

UPnP supports 6 protocol stacks for addressing, discovery, description, control, eventing, and presentation, but the Network Printer Card supports only Simple Service Discovery Protocol (SSDP) which allows addressing, description, and discovery.

Configuring UPnP

•Web Image Monitor SP 3300 Series: Select Network Settings > UPnP.

-Auto IP Enabled: You can enable or disable Auto IP. When this option is selected, the network print server cannot find the control

point and receive an IP address from the control point. The network print server will create an IP address of “169.254.XXX.XXX.”

-Multicast DNS Enabled: SSDP can use Multicast DNS.

-SSDP Enabled: You can enable or disable SSDP.

-SSDP TTL: You can specify the maximum number of subnets that SSPD multicasts can travel across.

4.3

TCP/IP environment

Using UPnP

If SSDP (Simple Service Discovery Protocol) is enabled, your network print server is checked by a control point. This control point is an application which supports finding UPnP devices. Information on searching and control functions or your network print server’s device information is displayed in an XML page (http://xxx.xxx.xxx.xxx:5200/ printer.xml).

Page 91 Page 93
Image 92
Page 91 Page 93
Contents SP 3300 Series Page Contents Maintenance TroubleshootingInstalling accessories SpecificationsSafety Information Safety During OperationPower Supply Power SaverEnergy Star Program RecyclingLaser Safety Remarque concernant les utilisateurs au CanadaCdrh Regulations AvertissementSpecial features IntroductionFront view Features SP 3300D SP 3300DNPrinter overview Control panel overview Understanding the LEDsRear view Status DescriptionSetting up the hardware Finding more informationAltitude adjustment Changing the font setting Click EmulationBasic setup Using toner save modePrinting a demo Using toner save mode Printing a demoSupplied software Printer driver featuresSoftware overview Macintosh System requirementsWindows Network setup SP 3300DN only Using SetIP programSupported operating systems RequirementsLoading print media Selecting print mediaType Size Dimensions Weighta Capacityb Type Size WeightSupported sizes of paper Print media for duplex printingType Guidelines Guidelines for selecting and storing print mediaGuidelines for special print media Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing manual feeder Load the paper with the side to be printed on facing upKnowing an output location Canceling a print job Printing a document Canceling a print jobBasic printing Printing a documentSupplies and accessories AccessoryToner cartridge Accessory Accessory DescriptionMaintenance Cleaning the printerCleaning the outside of the printer Cleaning the inside of the printerExpected cartridge life Maintaining the toner cartridgeToner cartridge storage Redistributing toner cartridge Replacing the toner cartridge Items Yield Average Printing a configurationMaintenance parts Troubleshooting Clearing paper jamsPaper feed area TrayAround the toner cartridge Manual trayDuplex jam Paper exit areaDuplex unit area Tips for avoiding paper jams Troubleshooting checklist Solving general printing problemsDpi Best, change it to Dpi Normal. SeeSolving print quality problems Condition Suggested solutions Vertical lines GrayBackground Toner smearCommon Windows problems Common PostScript problems Common Macintosh problemsInstalling accessories Precautions to take when installing accessoriesInstalling a memory module Disconnect the power cordActivating the added memory in the PS printer properties Specifications and description SpecificationsPrinter specifications Index Software section Contents Using Windows PostScript Driver Installing Printer Software in Windows Installing Printer SoftwareInstalling Software for Local Printing Typical InstallationCustom Installation Select Typical installation for a local printer. Click NextSelect Custom installation. Click Next Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Removing Printer Software Basic Printing Printing a DocumentPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Printing PreferencesLayout Tab Paper TabGraphics Tab Extras Tab Advanced OptionsWatermark OverlayUsing a Favorite Setting Using HelpAbout Tab Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsPrinting on Both Sides of Paper Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size NoneUsing Watermarks Using an Existing WatermarkCreating a Watermark Editing a WatermarkUsing Overlays What is an Overlay?Using a Page Overlay Creating a New Page OverlayUsing Windows PostScript Driver AdvancedSetting Up a Host Computer Setting Up a Client ComputerSharing the Printer Locally Check the Share this printer boxUsing Utility Applications Using Printer Settings UtilityOpening the Troubleshooting Guide Changing the Status Monitor Program SettingsUsing Your Printer with a Macintosh Installing SoftwareInstalling the printer driver Uninstalling the printer driverSetting Up the Printer For a Network-connectedFor a USB-connected Mac OS 8.6 ~Changing Printer Settings PrintingPrinting a Document LayoutPrinter Features Printing Multiple Pages on One Sheet of Paper N-Up PrintingDuplex Printing Index Page M000-8650 Network Printer User’s Guide SP 3300DN only OpenSSL License Page Programs supplied on the CD Appendix Getting started IntroductionSupported network environments Network Printer CardUninstalling software Click Typical installation for a network printerPrograms supplied on System requirementsUsing Web Image Monitor SP 3300 Series IP address setupUsing SetIP Print Driver Installation for Networked Printers Workstation SetupWindows Vista TCP/IP Windows XP TCP/IPWindows 2000 TCP/IP Disk Test Print Configuring DHCP/BOOTP Configuring SnmpUsing Snmp TCP/IP environmentConfiguring SLP Using SLPConfiguring Ddns Configuring WinsConfiguring UPnP Using UPnPBonjour UPnPPrinting protocols Standard TCP/IP portLPR port Printer PortConfiguring IPP in the print server Configuring a Windows clientSetting IPP security IPP portAdditional functions Configuring EtherTalk Configuring the printerEtherTalk environment EtherTalk printingTCP/IP printing Bonjour printerAdministration Tools Maintenance using Internet ServicesSpecifications AppendixOpenSSL Statements OpenSSL LicenseBootp M000-8651 Page Page
Top Page Image Contents