-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
-Do not submerge the appliance in water or any other liquid, or place it under a running tap.
Emptying the dust box:
-Empty the vacuum deposit when dust is visible though the transparent walls, when it is full, or when the va- cuum cleaner does not work to its full potential.
-In all cases, empty the deposit when the deposit full indicator shows completely red.
-Disconnect the hose from the vacuum cleaner’s air intake. (Fig 1)
-Disconnect the dust box from the appliance. (Fig. 3)
-Open the lid of the dust box and empty the contents into the appropriate waste disposal receptacle.
-Close the lid of the dust box.
-Attach the dust box to the appliance.
-Connect the hose to the vacuum cleaner’s air intake.
Changing the filters:
-Motor filter, it is advisable to be changed at least once a year or every 100 hours of the appliance’s use.
-HEPA air vent filter (High efficiency air filter that efficiently retains spores, ash, sawdust, pollen…), it is advisable to change it a least once a year or after every 100 hours of use.
-To remove filters:
Motor filter:
-Disconnect the dust box from the appliance. (Fig. 3)
-The filter motor can be found in the motor’s turbine air entrance.
-Turn the external cyclonic filter in a clockwise direction and remove the filter.
-Repeat this operation with the internal conical filter. (Fig 4)
-Remove the filter from its housing. (Fig. 5)
-To reassemble the filter, proceed with the above ins- tructions, in reverse order.
Outlet filter
-Open the cover of the filter housing at the top part of the vacuum cleaner. (Fig 6).
-Remove the filter from its housing.
-Change the filter.
-To reassemble the filter, proceed with the above ins- tructions, in reverse order.
Supplies
- Supplies can be acquired from distributors and au- thorised establishments (such as filters, etc. ) for your appliance model.
-Always use original supplies, designed specifically for your appliance model.
Anomalies and repair
-Take the appliance to an authorised technical support service if problems arise. Do not try to dismantle or repair without assistance, as this may be dangerous.
-If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage.
For EU product versions and/or in case that it is reques- ted in your country:
Ecology and recyclability of the product
-The materials of which the packaging of this appliance consists are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substan- ces that could be considered harmful to the environment
This symbol means that in case you wish to dispose of the product once its working life has ended, take it to an authorised waste agent for the selective collection of waste electrical and electronic equipment (WEEE)
This appliance complies with Directive 2006/95/EC on Low Voltage and Directive 2004/108/EC on Electromag- netic Compatibility.
Manual F40.indb 15
19/12/12 10:40