USER MANUAL
ENGLISH
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before carrying out any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. Contact Nilfi
TARGET
This Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.
The operators must not perform procedures reserved for qualifi ed technicians. Nilfi
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause damage to it.
DECLARATION OF CONFORMITY
The EC Declaration of Conformity (Fig. A), supplied with the machine, certifi es the machine conformity with the law in force.
NOTE
One copy of the original EC Declaration of Conformity is provided together with the machine documentation.
NOTE
If the machine is approved to be used on public roads, the machine is supplied with a special Certifi cation of Conformity.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate (1, Fig. E).
The machine model year is written in the EC Declaration of Conformity and it is also indicated by the fi rst two fi gures of the machine serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identifi cation data.
MACHINE model .................................................................
MACHINE serial number .....................................................
CAUTION!
The machine serial number is also printed on the machine frame (2, Fig. D).
OTHER REFERENCE MANUALS
–Spare Parts List (supplied with the machine): 33015056
–Service Manual (that can be consulted at Nilfi
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed by qualifi ed personnel or by Nilfi sk- Advance Service Centers. Only original spare parts and accessories must be used.
Call Nilfi
CHANGES AND IMPROVEMENTS
Nilfi
Any change and/or addition of accessory must be approved and performed by Nilfi
SR 1800S D 2WD
3