GTO SL-2000B Recommended Wiring and USE of Conduit, Mounting the Legs on the Slide Gate Operator

RECOMMENDED WIRING AND USE OF CONDUIT

Run the low voltage wire and receiver wire through PVC conduit into the slider unit to protect it from lawn mowers, weed eaters, grazing animals, etc. PVC conduit should be used for accessory wires such as loop detectors, key pads, card readers or any other entry device.

Roller Guard Roller Guard

	CAUTION	CAUTION
		STAND CLEAR
	STAND CLEAR
	Operator	Operator
	Roller	Roller Guard
Roller Guard	Roller Guard
	Separate PVC Conduits	Separate PVC Cond
		for power, receiver
	for power, receiver	and control wiring.
	and control wiring.
	Conduit through the concrete pad.	Conduit around the concrete pad.

MOUNTING THE LEGS ON THE SLIDE GATE OPERATOR

STEP 1

Mount the legs on the slide gate operator using the 3/8” x 3” Carriage Bolts, 3/8” Flat Washers, 3/8” Lock Washers, and 3/8” Nuts. See Illustration A.

3/8"-16x3" Carriage Bolts

G

RNIN

WA

R

N

3/8" Lock Washers

& Nuts

48" x 2" sq. Legs

Illustration A

13