KitchenAid KERI500, KERC500, KERS507, KERC507, YKERI500, YKERC500, YKERS507, YKERC507 warranty

Page 11

Using and Caring for Your Cooktop

Cookware tips

•Select a pan that is about the same size as the surface cooking area. Cookware should not extend more than 1 inch (2.5 cm) outside the area.

•For best results and greater energy efficiency, use only flat-bottomed cookware that makes good contact with the surface cooking area. Cookware with rounded, warped, ribbed (such as some porcelain enamelware), or dented bottoms could cause uneven heating and poor cooking results.

•Cookware designed with slightly indented bottoms or small expansion channels can be used.

•Cookware with non-stick finish has heating characteristics of the base material.

•Check for rough spots on the bottom of metal or glass cookware which will scratch the ceramic glass surface.

•Use flat bottom cookware for best heat conduction from the surface cooking area to the cookware. Determine flatness with the ruler test. Place the edge of a ruler across the bottom of the cookware. Hold it up to the light. No light should be visible under the ruler. Rotate the ruler in all directions and look for any light.

•Do not leave empty cookware, or cookware that has boiled dry, on a hot surface cooking area. The cookware could overheat, causing damage to the cookware or the surface cooking area.

Characteristics of cookware materials

The pan material affects how fast heat transfers from the surface cooking area through the pan material and how evenly heat spreads over the pan bottom. Choose pans that provide the best cooking results.

Aluminum

• Heats quickly and evenly.

 

• Use for all types of cooking.

 

• Medium or heavy thickness is best for most cooking.

 

• Used as a core or base in cookware to provide even heating.

Cast iron

• Heats slowly and evenly.

 

• Good for browning and frying.

 

• Maintains heat for slow cooking.

 

• Can be coated with porcelain enamel.

Ceramic or ceramic glass

Copper

•Heats slowly and unevenly.

•Use on low to medium settings.

•Follow manufacturer’s instructions.

•Heats very quickly and evenly.

•Used as a core or base in cookware to provide even heating.

Earthenware

• Can be used for cooktop cooking if recommended by the

 

manufacturer.

 

• Use on low settings.

Porcelain enamel-on-steel or enamel-on-cast iron

Stainless steel

•See cast iron and stainless steel.

•Heats quickly but unevenly.

•A core or base of aluminum or copper on the cookware provides even heating.

•Can be coated with porcelain enamel.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 9753308A Use and Care GuidePlease record your model’s information Anti-tip bracket Ange SafetyImportant Safety Instructions For units with ventilating hood For self-cleaning rangesFeature locations Arts and FeaturesReplacing the oven door Oven ventOven door Removing the oven doorRemoving the storage drawer Storage drawerUsing the surface units Using and Caring for Your CooktopTo use both elements for larger pans Using the ceramic glass cooktopDual-size cooktop surface element some models Cookware tips Characteristics of cookware materialsCaring for your cooktop Home canning informationIf There are What to do Cleaning tipsHow to keep your cooktop looking like new Steps to followCoil element models Removing surface units and reflector bowls for cleaningPart What to USE HOW to Clean Cleaning your cooktopCleaning under the lift-up cooktop Replacing the cooktop light Using and replacing the cooktop lightUnplug range or disconnect power Plug in range or reconnect powerUsing the electronic oven control Using and Caring for Your OvenSetting the clock To cancel the Kitchen Timer Using the kitchen timerChoose Kitchen Timer Start Kitchen TimerOven settings Rack positions Rack placement for specific foodsCooking tips Baking tipsRoasting tips Using aluminum foil in the ovenConvection baking tips Position racks Bake or Convection BakePut food in oven Choose settingSet temperature optional Preheat ovenPosition rack BroilBroiling guidelines Broiling rack positionsStart oven Choose Broil settingClose door When broiling is done, turn off ovenVariable temperature broiling Convection BroilPrepare oven Choose Convection Broil settingWhen broiling is over, turn off oven Convection RoastSee convection oven cookbook for Temperature recommendationsAfter the temperature reaches After cooking, turn off ovenEnter the adjustment Adjusting oven temperatureChoose Bake setting Set new offset temperatureConnect probe to oven Using the temperature probeHow to determine the amount of adjustment needed Insert probe into foodChoose cook setting Choose Temperature Probe settingThree short tones will also sound Clean probeAfter cooking, unplug probe Remove food from ovenSet Convect Full Meal cycle Using Convect Full MealPlace food in cold oven Bakeware choices Convect Full Meal chartTimed cooking Set Stop Time To delay start and stop automatically Prepare ovenComplete entry Set Start TimeArrange food on drying racks To cancel timed cooking settingsDehydrating Prepare foodPlace the bowl on Rack Choose Convection Bake settingWhen dehydrating is done, turn off oven Raising proofing breadSet temperature to 100F 38C Set temperatureRefer to Cooking tips section Thermal baking chartPress Bake Thermal roasting chartApproximate Broiling chartRack Total Time Meat Position Temperature Minutes Cleaning your oven and controls Cleaning Stainless Steel Surfaces door and drawer front Replacing halogen oven lights located on each side of oven Resetting circuit breakersOven lights Replacing standard oven lights located on back wallBefore you start Using the Self-Cleaning CycleTo delay clean using start time Choose Clean setting Setting the controlsTo start cleaning immediately 1. Choose Clean setting Set clean time optionalSet start time After the Self-Cleaning cycle is completedWhen the oven cools to normal baking/roasting temperatures How the cycle works For best cleaning resultsTo stop the Self-Cleaning cycle at any time Problem Possible Cause What to do TroubleshootingToo brown on Slow baking orRoasting Baked itemsOur consultants provide assistance with Equesting Assistance or ServiceOur consult- ants are available to assist you If you need assistance or service in CanadaYear Limited WarrantySecond Through Fifth9753308FA Guide d’utilisation et d’entretienMerci d’avoir acheté un appareil électroménager Kitchenaid Votre sécurité et celle des autres est très importante Sécurité de la cuisinièreLa bride antibasculement Conservez CES Instructions Importantes Instructions DE Sécurité Pour les appareils avec hotte de ventilation Pour les cuisinières avec programme d’autonettoyageIèces et caractéristiques Emplacements des caractéristiquesÉvent de la porte du four ’évent du fourEnlèvement de la porte du four Réinstallation de la porte du fourLa porte du four Le tiroir de remisageUtilisation des éléments de la table de cuisson Guide de réglage des boutons de commandeUtilisation Recommandée Utilisation et entretien de la table de cuissonUtilisation de la table de cuisson en vitrocéramique Utilisation et entretien de la table de cuissonConseils pour le choix d’ustensiles de cuisson Caractéristiques des matériaux des ustensiles de cuisson Chauffant Préparation de conserves à la maisonEntretien de la table de cuisson ’IL Y a Quoi Faire Conseils de nettoyageÉtapes de nettoyage à suivre Comment garder la surface de cuisson comme neuveModèles avec éléments en spirale Pièce Articles À Employer Nettoyage de la table de cuissonNettoyage sous la table de cuisson soulevée Certains modèles Utilisation et entretien du four Utilisation du tableau de commande électronique du fourChangement des signaux sonores Afficheur/horlogeCommencement d’une fonction Annulation d’une opérationRéglage de l’heure Choisir Kitchen Timer Minuterie de cuisineRéglage de l’horloge Utilisation de la minuterieAnnulation du minutage de la minuterie Pour supprimer Le signal sonoreMise en marche de la minuterie Réglage Schéma Renseignements SUR LE Réglage Réglages du fourConseils pour le choix des ustensiles de cuisson Conseils pour la cuissonConseils pour la cuisson au four Position des grillesConseils pour le rôtissage Utilisation de papier d’aluminium dans le fourConseils pour la cuisson au four par convection Remarques Cuisson au four avec ou sans convectionPositionner les grilles Placer l’aliment au four Choisir le réglageRégler la température facultatif Préchauffer le fourCuisson au gril Mise en marche du four Choisir le réglage Broil Cuisson au grilFermer la porte Cuisson au gril par convectionLorsque la cuisson au gril est terminée, éteindre le four Cuisson au gril à température variablePréparer le four Rôtissage par convectionChoisir la température facultatif Mise en marche du four Entrer la correction Réglage de la température du fourChoisir le réglage Bake Cuisson au four Réglage de la nouvelle température corrigéeAjuster LA Utilisation de la sonde thermométriqueInsérer la sonde dans l’aliment Connecter la sonde thermométrique au fourChoisir la fonction de cuisson Nettoyer la sonde Mettre le four en marche10. Débrancher la sonde après la cuisson Retirer l’aliment du fourPlacer le mets dans le four froid Préparation d’un repas complet par convectionExemple pour réglage Auto Lorsque le programme de cuisson deTableau de cuisson de repas complet par convection Choix d’ustensiles de cuisson Risque dempoisonnement alimentaire Cuisson commandée par la minuterieRégler l’heure d’arrêt Stop Time SUR 3 0Compléter l’entrée Choisir l’heure de mise en marche Start TimeChoisir l’heure de fin de cuisson Stop Time Répartir les aliments sur les grilles de séchage DéshydratationPréparer les aliments Choisir le réglage Convection Bake Cuisson par convection Position de la porteRégler la température Levée de la pâte à painPlacer le bol sur la grille Choisir le réglage Convection BakeAffichage heure Se référer à la section Conseils pour la cuisson Tableau de cuisson thermiqueAgneau Gigot Tableau de rôtissage thermiqueViandes LA Grille Température Tableau de cuisson au grilDurée Pièce Articles Utilisés Mode DE Nettoyage Nettoyage du four et des boutons de commandeAgent DE Nettoyage Utilisation Brancher la cuisinière ou rétablir le courant électrique Lampes du fourRéglage des disjoncteurs Avant la mise en marche Utilisation du programme d’autonettoyage’assurer que l’horloge est réglée à l’heure correcte Réglage des commandesChoisir la durée de l’opération facultatif SUR 4 0Choisir l’heure de mise en marche Terminer l’entrée des commandesPour interrompre le programme ’autonettoyage à tout moment Pour obtenir les meilleurs résultats de nettoyageFonctionnement du programme d’autonettoyage Problème Cause Possible Quoi Faire Guide de diagnosticAliments Articles cuits trop bruns à la baseCuisson non Uniforme desUide de diagnostic Nos consultants vous renseigneront sur les sujets suivants Demande d’assistance ou de serviceSi vous avez besoin de pièces de rechange Pour plus d’assistanceSi vous avez besoin d’assistance ou de service au Canada Garantie

KERI500, KERC500, KERS507, KERC507, YKERI500, YKERC500, YKERS507, YKERC507, YKERI500, YKERC500 specifications

KitchenAid has long been synonymous with quality and innovation, particularly in the realm of kitchen appliances. Among its esteemed lineup, models such as the YKERC500, YKERI500, KERI500, KERC500, KERS507, KERC507, YKERI500, YKERC500, YKERS507, and YKERC507 represent a significant leap forward in efficiency, functionality, and design.

The KERC500 and KERI500 models are designed with precision in mind, featuring a powerful motor that ensures consistent performance whether you’re mixing, kneading, or whipping. These models are equipped with a robust 500 watt mixer that can handle a variety of ingredients, making them ideal for both seasoned chefs and baking enthusiasts. The presence of multiple speed settings allows users to adjust mixing speeds as per their requirements, providing flexibility and control during food preparation.

All these models integrate advanced technologies that enhance usability. The KitchenAid planetary mixing action allows the mixing attachment to rotate in the opposite direction of the bowl, ensuring every ingredient is thoroughly incorporated. This technology not only reduces mixing time but also maximizes efficiency, making it a favorite among those who value both speed and thoroughness in their food preparation.

The design of these mixers is also noteworthy. With a sleek and durable exterior, they can effortlessly complement any kitchen decor. Many of the models, such as the KERS507 and KERC507, feature additional attachments and accessories like dough hooks, flat beaters, and wire whips, which broaden their versatility and can be swapped out easily via the attachment hub.

Moreover, the YKERC500 and YKERS507 models include a variety of advanced safety features, ensuring users can operate them confidently. Built-in overload protection and a sturdy base help to prevent the mixer from toppling over during heavy mixing tasks.

In terms of cleanup, KitchenAid models are designed for convenience. Many attachments are dishwasher safe, allowing for hassle-free maintenance after use. This focus on ease of cleaning further solidifies KitchenAid's reputation as a user-oriented brand.

In summary, the KitchenAid YKERC500, YKERI500, KERI500, KERC500, KERS507, KERC507, along with their counterparts, represent the pinnacle of kitchen appliance technology. With their powerful motors, innovative mixing technologies, versatile attachments, and user-friendly designs, they promise to elevate any cooking experience and meet the demands of even the busiest kitchen.
Top Page Image Contents