Operator
Interface
Main Screen
The main screen is provides “an overall view“ of the chiller performance in addition to the main and sub operating modes. The table below indicates other items found , when specified by options, that can be scrolled to via the up or down arrows.
Main Screen Data Fields Table
Description | Units | Resolution | Dependencies |
1. Chiller Mode (>> submodes) |
|
|
|
2. Circuit 1 Mode (>> submodes) |
|
|
|
3. Circuit 2 Mode (>> submodes) |
|
|
|
4. Evap Ent/Lvg Water Temp | F / C | 0.1 |
|
5. Cond Ent/Lvg Water Temp | F / C | 0.1 |
|
6. Active Chilled Water Setpoint (>>source) | F / C | 0.1 |
|
7. Active Hot Wtr Setpoint (>>source) | F / C | 0.1 | If in heat installed |
8. Active Current Limit Setpoint (>>source) | % RLA | 1 |
|
9. Active Base Loading Setpoint (>>source) | % | 1 | If enabled |
10. Circuit 1 Purge Mode (status, i.e. on, off, | See modes in | Emum |
|
adaptive, auto)) | purge manual |
|
|
11. Circuit 2 Purge Mode (status, i.e. on, off, | See modes in | Enum |
|
adaptive, auto)) | purge manual |
|
|
12. Approx Chiller Capacity | Tons / kW | XXX | If option installed |
13. Active Ice Termination Setpoint (>>source) | F / C | 0.1 | If option installed |
14. Software Version |
| 0.XX |
|
Chiller Operating Mode
The
Circuit Operating Mode
The
36 |