Dairy Center (some models)
Dairy center provides convenient storage for items such as butter, cheese, etc.
Dairy Center is adjustable to accommodate storage needs. Dairy Center may also be removed for cleaning. To remove Dairy Center perform the following steps:
•Remove Dairy Center cover by opening cover. Push cover inward at pivot points and pull cover out. Lift Dairy Center up and pull out to remove.
•Replace Dairy Center by reversing procedure.
Temperature Controlled Beverage
Chiller™ (some models)
Temperature Controlled Beverage Chiller™ keeps beverages up to 5°F (3°C) colder than refrigerator section. Air inlet allows air from freezer section to pass to beverage chiller. Air inlet is located on interior wall of refrigerator door.
Beverage chiller control is located on left front wall of refrigerator section. Control adjusts amount of air circulating in beverage chiller. Turn control to cold* for normal refrigerator temperature and to colder** for colder temperature.
Dairy Center
Snack Shelf (some models)
Snack shelf provides convenient storage for small items and snacks.
To remove snack shelf lift up and pull out. Replace snack shelf by sliding in above desired support rail and pushing down into place.
A
B
A.Refrigerator section left front wall
B.Temperature control
Beverage Chiller™ control
Beverage Chiller position is adjustable to accommodate storage needs. Beverage Chiller may also be removed for cleaning. To remove Beverage Chiller perform the following steps:
•Grasp Beverage Chiller by sides lift up and pull out to remove.
•To replace, slide Beverage Chiller between desired shelf rails in door liner and push Beverage Chiller down into place.
•If Beverage Chiller door track is cleaned, door track must be lubricated with petroleum jelly for proper operation of chiller door.
Important
For proper operation of Beverage Chiller, one of the 3 cold air intake holes must line up with notch in right door dike.
Snack Shelf
11