CONTROL PANEL
Override timer
Any timer settings made can be temporarily overridden by selecting Override timer. It is possible to override the timer for 1, 3 or 5 days.
Spot Cutting
Spot cutting means the robotic lawnmower will work in a spiral pattern in order to cut the grass in the area where it was started. When this is done, the robotic lawnmower will automatically switch to Main Area or Secondary Area.
This function is useful for quickly mowing an area where the grass has been mown less than in other parts of the garden.
The Spot Cutting function is activated with the START button. You can select how the robotic lawnmower should continue to work once mowing is finished by pressing Right Arrow and then specifying On Main Area or On Secondary Area.
5.2 Operation selection Parking
When the PARK button is pressed the following operation selections can be chosen.
Park until further notice
The robotic lawnmower stays in the charging station until another operating mode is selected by pressing the START button.
Start again in 3 hours
The robotic lawnmower stays in the charging station for three hours and then returns automatically to normal operation. This operation selection is suitable when there is a need to pause operation, e.g. for temporary irrigation or for games on the lawn.
Start with next timer
The robotic lawnmower stays in the charging station until the next Timer setting permits operation. This operation selection is suitable if one wishes to cancel an ongoing mowing cycle and allow the robotic lawnmower to stay in the charging station until the next day.
This option is not displayed if there are no Timer settings.
English - 38