Husqvarna 330X, 320 manual Timer, Copy

Page 44

MENU FUNCTIONS

6.3 Timer

The lawn should not be cut too often to obtain the best mowing result. Consequently, it is important to limit the operating time using the timer function if the working area is less than the mower’s working capacity. When the robotic lawnmower is allowed to mow too often, the lawn may appear flattened. Besides, the robotic lawnmower is subjected to unnecessary wear.

The timer function is also an ideal tool to control which periods the robotic lawnmower should not mow, for example, when the children are playing in the garden.

Maximum performance is obtained when the timer is turned off and the robotic lawnmower is allowed to mow around the clock seven days a week.

The factory setting is that the timer is inactive and the robotic lawnmower will operate around the clock seven days a week. This is normally a suitable setting for a working area corresponding to the robotic lawnmower’s maximum performance, i.e. 3,200 m2 (2,200 m2 for Automower® 320).

When setting the timer, calculate that the robotic lawnmower mows about 135 m2 per hour and day (90 m2 for Automower® 320). For example; If the working area is 1,200 m2 the robotic lawnmower must operate for about 9 hours per day (about 13 hours for Automower® 320).

A clock symbol is displayed on the start page when the timer settings are set. The clock symbol is black when the robotic lawnmower is not allowed to mow due to a timer setting and it is white when the robotic lawnmower is allowed to mow.

It is possible to configure two work periods a day There can be unique work periods in each day, but it is also possible to copy the current day’s work period to all the other days.

Use the down arrow key to select the checkbox and then press OK. Only now can the timer settings be carried out. The robotic lawnmower will mow only on those days that have been activated.

Copy

Use this function to copy the current day settings to other days.

Use the up and down arrow keys to move the cursor between days. The times will be copied to the days that are marked with OK.

Monday

Period 1 Period 2

Copy

Overview

Reset

All Mo Tu We Th	Fr Sa Su Current All week
days	day

3012-1225

English - 42

Image 44

Contents Husqvarna Automower 320/330X OPERATOR’S Manual Page Introduction and safety Troubleshooting Technical DataGuarantee terms Garden examples MaintenanceMEMO Introduction and safety IntroductionSymbols on the product Symbols in the Operator’s Manual Text Important Information TextSafety instructions UseMoving Maintenance Presentation What is what? Numbers in the illustration representCapacity Package contentFunction Mowing technique Working methodSearch method 1 Irregular Movement patternFinding the charging station Search method 2 Follow guide wire Search method 3 Follow boundary wirePreparations InstallationSee 7 Garden examples on page 65 for installation examples Installation of the charging station Best charging station location3012-559 Connecting the transformer Installing and connecting the charging station Do not tread or walk on the charging station’s plateCharging the battery Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries Boundaries within the working area Secondary areasPassages when mowing SlopesLaying the boundary wire Laying the boundary wire in towards the charging Station Splicing the boundary wireConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire 135º 90º 3018-061 3012-953 3012-954 3018-055 Checking the installation Use Memo on page 2 to make a note of the PIN code First start-up and calibrationTest docking with the charging station Charging a flat battery UseUsing the timer StartingStopping Switching offAdjusting the cutting height Control panel Secondary area Operation selection StartMain area Operation selection Parking Main switch Charging station’s Park buttonMenu functions Main menuBrowse between menus Number seriesTimer Menu structureTimer CopyReset OverviewCurrent day All weekTo lower the cutting height Cutting heightTo increase the cutting height Alarm SecurityFunction Low Medium High Time lockChange PIN code New loop signalCustom Advanced Fault messagesMessages Weather timer Reset messagesWeather timer Info messagesExample InstallationCutting time Guide Guide 1 delay Guide Guide 2 delayGuide Boundary loopOverview Test Setting RangeCharging station range Lawn coverage AreaArea X How often? Area 1-5 How?Area X How far? GPS This section does not apply to AutomowerReset Reset Current areaReset All areas Lawn coverage How far?Corridor width Corridor width BoundaryCorridor width Guide Exit anglesExit angles Sectors Reversing distanceAutomatic passage handling Drive past wireInstallation shape Profiles SettingsSave settings to a Profile Check New loop signal, See 6.5 Security on page 45 Change the name of a profileUse a Profil One Automower for several gardensSpiral cutting Spiral cuttingCutting height calibration Time & DateCountry Select Reset all user settings in the menu and press OK Calibration of guide wireReset all user settings Mower house AccessoriesHeadlight Installation proposals and settings Garden examplesInstallation proposals and settings Lawn coverageFind charging StationGuide 1 Proportion 40% Guide 1 Proportion 60%As the GPS assisted navigation 3012-978 3018-095 Secondary area mode on Maintenance Charging station Winter storageRobotic lawnmower Winter service CleaningAfter winter storage Chassis and blade discTransport and moving Event of a thunderstormChassis WheelsBattery BladesTroubleshooting Fault messagesTroubleshooting Troubleshooting Info messages Indicator lamp in the charging station Light Cause ActionSymptoms Lawnmower runs, but Blade disc doesNot rotate Lawnmower mowsFinding breaks in the loop wire 3012-1208 3018-053 3018-055 Technical Data DataGuarantee terms Environmental information EC Declaration of Conformity EN 61000-6-3 emission EN 61000-6-1 immunityOriginal Instructions