Husqvarna 330X, 320 manual Symptoms

TROUBLESHOOTING

9.4 Symptoms

If your robotic lawnmower does not work as expected, follow the troubleshooting guide below.

There is a FAQ (Frequently Asked Questions) on www.automower.com which provides more detailed answers to a number of standard questions. It you still cannot find the reason for the fault, contact the local dealer.

Symptoms	Cause	Action
The robotic	The charging station is on a slope	Place the charging station on a surface that is
lawnmower has		entirely level. See 3.2 Installation of the charging
difficulty docking		station on page 16.
with the charging	The boundary wire is not laid	Check that the charging station has been
station
	correctly by the charging station.	installed according to the instructions. See 3.2
		Installation of the charging station on page 16.
Uneven mowing	The robotic lawnmower works too	Increase the working times. See 6.3 Timer on
results	few hours per day.	page 42.
		The Weather timer senses that the lawn has
		been mowed more than it actually has. Increase
		the intensity level in the Weather timer. If this
		does not help, turn off the Weather timer and
		contact your dealer.
	The shape of the working area	Also use Lawn coverage > More to steer the
	requires manual settings to be made	robotic lawnmower to one or more remote
	for the robotic lawnmower to find its	areas. See 6.8 Installation on page 49.
	way to all remote areas.
	Working area too large.	Try limiting the working area or extending the
		working time. See 6.3 Timer on page 42.
	Blunt blades.	Replace all the blades and screws so that the
		rotating parts are balanced. See 8.7 Blades on
		page 74.
	Long grass in relation to the set	Increase the cutting height and then successively
	cutting height.	lower.
	Accumulation of grass by the blade	Check that the blade disc skid plate rotate easily.
	disc or around the motor shaft.	If not, screw off the blade disc and remove grass
		and foreign objects. See 8.5 Transport and
		moving on page 73.
The robotic	The robotic lawnmower clock needs	Set the clock. See 6.9 Settings on page 59.
lawnmower runs at	to be set.
the wrong time
	The start and stop times for mowing	Reset the start time and stop time settings for
	are incorrect.	mowing. See 6.3 Timer on page 42.
The robotic	Damaged blades lead to imbalance	Inspect the blades and screws and replace them
lawnmower vibrates	in the cutting system.	if necessary. See 8.7 Blades on page 74.
	Many blades in the same position lead	Check that only one blade is fitted at each screw.
	to imbalance in the cutting system.

English - 80