Husqvarna 320, 330X manual Settings, Profiles, Save settings to a Profile

Page 61

MENU FUNCTIONS

6.9 Settings

This selection allows you to carry out changes to the robotic lawnmower’s general settings.

Settings

Profiles	ECO	Spiral		Time &	Language Country	Cutting	Guide wire	Reset
	mode	cutting		date		height	calibration	all user
						calibration		settings
						calibration		settings

On/Off Intensity

On/Off

Set time

Set date Time format Date format

Use Change name Save

Profiles

With the function Profiles, different sets of user settings can be saved. This means that the settings can be easily stored and reused if the robotic lawnmower for example will be used in different gardens. Up to three different profiles can be stored.

Save settings to a Profile

•First make the settings in the mower that will be stored in the profile.

•Check Enable Profiles and press OK.

•Check the profile to be stored, move the cursor with the up and down arrow keys.

•Press OK.

•Check Save and press OK, followed by arrow key left and OK. All user settings are now stored in the selected profile.

•If settings that are not stored to the profile are made, the symbol * is shown next to the profile name.

3012-572

3012-574

English - 59

Image 61

Contents Husqvarna Automower 320/330X OPERATOR’S Manual Page Technical Data Introduction and safety TroubleshootingGuarantee terms Garden examples MaintenanceMEMO Introduction Introduction and safetySymbols on the product Text Important Information Text Symbols in the Operator’s ManualUse Safety instructionsMoving Maintenance Presentation Numbers in the illustration represent What is what?Function Package contentCapacity Working method Mowing techniqueFinding the charging station Movement patternSearch method 1 Irregular Search method 3 Follow boundary wire Search method 2 Follow guide wireSee 7 Garden examples on page 65 for installation examples InstallationPreparations Best charging station location Installation of the charging station3012-559 Connecting the transformer Do not tread or walk on the charging station’s plate Installing and connecting the charging stationCharging the battery Plan where to lay the boundary wire Installation of the boundary wireWorking area boundaries Secondary areas Boundaries within the working areaSlopes Passages when mowingLaying the boundary wire Splicing the boundary wire Laying the boundary wire in towards the charging StationConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire 135º 90º 3018-061 3012-953 3012-954 3018-055 Checking the installation Test docking with the charging station First start-up and calibrationUse Memo on page 2 to make a note of the PIN code Use Charging a flat batteryStarting Using the timerAdjusting the cutting height Switching offStopping Control panel Main area Operation selection StartSecondary area Operation selection Parking Charging station’s Park button Main switchMain menu Menu functionsBrowse between menus Number seriesMenu structure TimerCopy TimerOverview ResetCurrent day All weekTo increase the cutting height Cutting heightTo lower the cutting height Security AlarmFunction Low Medium High Time lockCustom New loop signalChange PIN code Messages Fault messagesAdvanced Reset messages Weather timerWeather timer Info messagesCutting time InstallationExample Guide Guide 2 delay Guide Guide 1 delayGuide Boundary loopCharging station range Setting RangeOverview Test Area Lawn coverageArea X How far? Area 1-5 How?Area X How often? This section does not apply to Automower GPSReset Current area ResetReset All areas Lawn coverage How far?Corridor width Boundary Corridor widthExit angles Corridor width GuideExit angles Sectors Reversing distanceInstallation shape Drive past wireAutomatic passage handling Save settings to a Profile SettingsProfiles Change the name of a profile Check New loop signal, See 6.5 Security on page 45Use a Profil One Automower for several gardensSpiral cutting Spiral cuttingCountry Time & DateCutting height calibration Reset all user settings Calibration of guide wireSelect Reset all user settings in the menu and press OK Headlight AccessoriesMower house Garden examples Installation proposals and settingsLawn coverage Installation proposals and settingsFind charging StationAs the GPS assisted navigation Guide 1 Proportion 60%Guide 1 Proportion 40% 3012-978 3018-095 Secondary area mode on Maintenance Robotic lawnmower Winter storageCharging station Cleaning Winter serviceAfter winter storage Chassis and blade discEvent of a thunderstorm Transport and movingChassis WheelsBlades BatteryFault messages TroubleshootingTroubleshooting Troubleshooting Info messages Light Cause Action Indicator lamp in the charging stationSymptoms Blade disc does Lawnmower runs, butNot rotate Lawnmower mowsFinding breaks in the loop wire 3012-1208 3018-053 3018-055 Data Technical DataGuarantee terms Environmental information EN 61000-6-3 emission EN 61000-6-1 immunity EC Declaration of ConformityOriginal Instructions