MENU FUNCTIONS
Intensity
The level of sensitivity can be adjusted to set how much over the average height the grass has to be for spiral cutting to begin.
Low sensitivity means that spiral cutting begins less often. High sensitivity means that spiral cutting begins more often.
Time & Date
This function allows you to set current time and required time format in the robotic lawnmower.
Time
Enter the correct time and press OK to exit.
Time format
Move the cursor to the required time format: 12h/24h
Exit by pressing OK.
Date
Enter current date and press OK to exit.
Date format
Place the cursor at the required date format:
Exit by pressing OK.
Language
Set the language displayed in the menus with this function.
Place the cursor at the required language and press OK.
Country
With this function you can select in what country the robotic lawnmower will work.
Place the cursor at the required country and press OK.
Cutting height calibration
The cutting height may need to be calibrated in rare cases. This should only be done if the robotic lawnmower itself requests it or if your dealer recommends it.
The cutting height adjustment is then carried out automatically to minimum and maximum height and back to the selected cutting height.
1.Select Cutting height calibration and press OK.
2.Await a message stating that the calibration is complete.
English - 62