Husqvarna 330X, 320 manual Blades, Battery

Page 76

MAINTENANCE

8.7 Blades

WARNING

Always use original blades and screws when replacing. Only replacing the blades and reusing the screw can result in a screw wearing during mowing and shearing. The blades can then be propelled from under the body and cause serious injury.

There are three blades on the robotic lawnmower, which are screwed into the blade disc. All three blades and screws must be replaced at the same time to obtain a balanced cutting system.

There are several different types of mower blades to choose from as accessories, with different features. Use Husqvarna AB approved blades only. Please contact your dealer for more information.

To replace the blades:

1.Set the main switch to position 0.

2.Wear protective gloves.

3.Turn the robotic lawnmower upside down.

4.Rotate the skid plate so that its holes align with the screw for the blade.

5.Remove the screw. Use a straight slot or cross-tip screwdriver.

6.Remove the blade and the screw.

7.Screw on the new blade and the new screw.

8.8Battery

The battery is maintenance-free, but has a limited service life of 2 to 4 years.

Battery service life is dependent on the length of the season and how many hours a day the robotic lawnmower is used. A long season or many hours of use per day means that the battery must be replaced more regularly.

Contact your dealer to replace the battery.

3012-1060

3012-272

3012-1207

English - 74

Image 76

Contents Husqvarna Automower 320/330X OPERATOR’S Manual Page Introduction and safety Troubleshooting Technical DataGuarantee terms Garden examples MaintenanceMEMO Introduction and safety IntroductionSymbols on the product Symbols in the Operator’s Manual Text Important Information TextSafety instructions UseMoving Maintenance Presentation What is what? Numbers in the illustration representFunction Package contentCapacity Mowing technique Working methodFinding the charging station Movement patternSearch method 1 Irregular Search method 2 Follow guide wire Search method 3 Follow boundary wireSee 7 Garden examples on page 65 for installation examples InstallationPreparations Installation of the charging station Best charging station location3012-559 Connecting the transformer Installing and connecting the charging station Do not tread or walk on the charging station’s plateCharging the battery Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries Boundaries within the working area Secondary areasPassages when mowing SlopesLaying the boundary wire Laying the boundary wire in towards the charging Station Splicing the boundary wireConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire 135º 90º 3018-061 3012-953 3012-954 3018-055 Checking the installation Test docking with the charging station First start-up and calibrationUse Memo on page 2 to make a note of the PIN code Charging a flat battery UseUsing the timer StartingAdjusting the cutting height Switching offStopping Control panel Main area Operation selection StartSecondary area Operation selection Parking Main switch Charging station’s Park buttonMenu functions Main menuBrowse between menus Number seriesTimer Menu structureTimer CopyReset OverviewCurrent day All weekTo increase the cutting height Cutting heightTo lower the cutting height Alarm SecurityFunction Low Medium High Time lockCustom New loop signalChange PIN code Messages Fault messagesAdvanced Weather timer Reset messagesWeather timer Info messagesCutting time InstallationExample Guide Guide 1 delay Guide Guide 2 delayGuide Boundary loopCharging station range Setting RangeOverview Test Lawn coverage AreaArea X How far? Area 1-5 How?Area X How often? GPS This section does not apply to AutomowerReset Reset Current areaReset All areas Lawn coverage How far?Corridor width Corridor width BoundaryCorridor width Guide Exit anglesExit angles Sectors Reversing distanceInstallation shape Drive past wireAutomatic passage handling Save settings to a Profile SettingsProfiles Check New loop signal, See 6.5 Security on page 45 Change the name of a profileUse a Profil One Automower for several gardensSpiral cutting Spiral cuttingCountry Time & DateCutting height calibration Reset all user settings Calibration of guide wireSelect Reset all user settings in the menu and press OK Headlight AccessoriesMower house Installation proposals and settings Garden examplesInstallation proposals and settings Lawn coverageFind charging StationAs the GPS assisted navigation Guide 1 Proportion 60%Guide 1 Proportion 40% 3012-978 3018-095 Secondary area mode on Maintenance Robotic lawnmower Winter storageCharging station Winter service CleaningAfter winter storage Chassis and blade discTransport and moving Event of a thunderstormChassis WheelsBattery BladesTroubleshooting Fault messagesTroubleshooting Troubleshooting Info messages Indicator lamp in the charging station Light Cause ActionSymptoms Lawnmower runs, but Blade disc doesNot rotate Lawnmower mowsFinding breaks in the loop wire 3012-1208 3018-053 3018-055 Technical Data DataGuarantee terms Environmental information EC Declaration of Conformity EN 61000-6-3 emission EN 61000-6-1 immunityOriginal Instructions