MENU FUNCTIONS
Info messages
Messages shown in the display not caused by an actual fault are instead saved under the Info messages heading. Examples for such messages are Weak GPS signal and Slope too steep. See 9.1 Fault messages on page 75 for more information on possible reasons for each message.
By date
This list contains the latest 50 fault messages sorted by date with the last incident to occur first on the list.
By frequency
This list contains the latest 50 message sorted by how many times the same fault has occurred.
Reset messages
To empty all message lists, select Reset and press OK. Confirm by pressing OK once more.
6.7 Weather timer
This function allows the robotic lawnmower to automatically adjust its mowing times based on how quick the lawn grows. When the weather is good for grass growth, the robotic lawnmower mows more often and when grass growth is slower the robotic lawnmower will automatically spend less time on the lawn.
The robotic lawnmower will however not operate longer than the time that may be configured in the timer settings. For optimal weather timer performance, it is recommended when setting the timer to only
When the weather timer is activated, the robotic lawnmower needs time to decide what the optimal mowing time is for the working area in question. For this reason it can take a number of days before the mowing results are optimal.
When the weather timer is activated, it is very important to regularly check that the blade disc is clean and that the blades are in good condition. Any grass twisted around the blade disc shaft or blunt blades can affect how the weather timer functions.
Weather timer
To activate the weather timer: place the cursor at On and press OK.
Weather timer
On/Off | Cutting time |
Low - | Low | Medium | High | High + |
English - 48