Husqvarna 330X, 320 manual Troubleshooting

TROUBLESHOOTING

No loop signal	The transformer is not connected.	Check the wall socket connection and whether
		an earth-fault breaker has tripped.
	The low voltage cable is damaged	Check that the low voltage cable is not
	or not connected.	damaged. Check that it is also properly
		connected to the charging station and to the
		transformer.
	The boundary wire is not connected	Check that the boundary wire connectors are
	to the charging station	fitted properly to the charging station. See 3.5
		Connecting the boundary wire on page 27.
	Boundary wire broken.	Find out where the break is. See 9.5 Finding
		breaks in the loop wire on page 82. Replace the
		damaged section of the loop with a new loop
		wire and splice using an original coupler.
	ECO mode is activated and the	Place the robotic lawnmower in the charging
	robotic lawnmower has attempted	station, press the Start button and close the
	to start outside the charging station.	hatch. See 6.9 Settings on page 59.
	The boundary wire is laid in the	Check that the boundary wire has been laid
	wrong direction around an island.	according to the instructions. See 3 Installation
		on page 15.
	The connection between the robotic	Place the robotic lawnmower in the charging
	lawnmower and the charging station	station and generate a new loop signal.
	has been broken.	See 6.5 Security on page 45.
	Disturbances from metal objects	Try moving the boundary wire.
	(fences, reinforcement steel) or
	buried cables close by.
Trapped	The robotic lawnmower has got	Free the robotic lawnmower and rectify the
	caught in something.	reason for it becoming trapped.
	The robotic lawnmower is stuck	Check if there are any obstacles which make
	behind a number of obstacles.	it hard for the robotic lawnmower to move on
		from this location.

English - 76