MENU FUNCTIONS
GPS
This section does not apply to Automower® 320.
GPS assisted navigation uses an inbuilt GPS to check which areas are mowed and thereby which areas need to be mowed next. After a number of days operating, the robotic lawnmower creates a map of the working area and where the guide wires are laid. In this way Automower® 330X can automatically set distance and proportion for hard to reach parts of the working area.
The automatic settings made by the robotic lawnmower cannot be read in the display.
IMPORTANT INFORMATION
If the same robotic lawnmower is used for two or more charging stations that are close together (neighbours for instance), the GPS assisted navigation can only be used in one of the working areas. Other- wise the digital map can be misleading and the robotic lawnmower’s lawn cover- age can therefore be reduced.
Overview
This function summarises selected settings for each area. It is also possible to test exit settings and to identify the distance from the charging station to a remote area.
Overview > Test
Testing selected settings can be seen as a natural part of the installation.
Using the Test function, the robotic lawnmower travels the farthest distance from the loop allowed by the selected corridor width.
To test the selected settings:
1.Place the robotic lawnmower in the charging station.
2.Use the down and the right/left arrow keys to select Test under the area to be tested. Press OK.
3.Press START and close the display hatch.
4.The robotic lawnmower will now leave the charging station and begin following the specified loop toward the remote area. Check that the robotic lawnmower can follow the loop all along the required distance.
5.The test is approved when the robotic lawnmower can follow the selected loop to the required starting point without any problem.
English - 54