Husqvarna 330X, 320 manual Safety instructions, Use

Page 8

INTRODUCTION AND SAFETY

1.4 Safety instructions

Use

•This robotic lawnmower is designed to mow grass in open and level ground areas. It may only be used with the equipment recommended by the manufacturer. All other types of use are incorrect. The manufacturer’s instructions with regard to operation/maintenance and repair must be followed precisely.

•The robotic lawnmower may only be operated, maintained, and repaired by persons that are fully conversant with its special characteristics and safety regulations. Please read the Operator’s Manual carefully and make sure you understand the instructions before using the robotic lawnmower.

•It is not permitted to modify the original design of the robotic lawnmower. All modifications are made at your own risk.

•Check that there are no stones, branches, tools, toys or other objects on the lawn that can damage the blades. Objects on the lawn can also lead to the robotic lawnmower getting stuck in them and help may

be required to remove the object before the mower can continue mowing.

• Start the robotic lawnmower according to the instructions. When the main switch is set to 1; make sure to keep your hands and feet away from the rotating blades. Never put your hands and feet under the robotic lawnmower.

•Never lift up the robotic lawnmower or carry it around when the main switch is in position 1.

•Do not let persons who do not know how the robotic lawnmower works and behaves use it.

•Never use the robotic lawnmower if persons, especially children, or pets, are in the immediate vicinity.

•Do not put anything on top of the robotic lawnmower or its charging station.

•Do not allow the robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or wires.

•Do not use the robotic lawnmower if the main switch does not work.

•Always switch off the robotic lawnmower using the main switch when the robotic lawnmower is not in use. The robotic lawnmower can only start when the main switch is set to 1 and the correct PIN code has been entered.

•The robotic lawnmower must never be used at the same time as a sprinkler. In this case use the timer function (see 6.3 Timer on page 6) so the mower and sprinkler never run simultaneously.

1001-003

3012-1057

3012-663

English - 6

Image 8

Contents Husqvarna Automower 320/330X OPERATOR’S Manual Page Introduction and safety Troubleshooting Technical DataGuarantee terms Garden examples MaintenanceMEMO Introduction and safety IntroductionSymbols on the product Symbols in the Operator’s Manual Text Important Information TextSafety instructions UseMoving Maintenance Presentation What is what? Numbers in the illustration representCapacity Package contentFunction Mowing technique Working methodSearch method 1 Irregular Movement patternFinding the charging station Search method 2 Follow guide wire Search method 3 Follow boundary wirePreparations InstallationSee 7 Garden examples on page 65 for installation examples Installation of the charging station Best charging station location3012-559 Connecting the transformer Installing and connecting the charging station Do not tread or walk on the charging station’s plateCharging the battery Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries Boundaries within the working area Secondary areasPassages when mowing SlopesLaying the boundary wire Laying the boundary wire in towards the charging Station Splicing the boundary wireConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire 135º 90º 3018-061 3012-953 3012-954 3018-055 Checking the installation Use Memo on page 2 to make a note of the PIN code First start-up and calibrationTest docking with the charging station Charging a flat battery UseUsing the timer StartingStopping Switching offAdjusting the cutting height Control panel Secondary area Operation selection StartMain area Operation selection Parking Main switch Charging station’s Park buttonMenu functions Main menuBrowse between menus Number seriesTimer Menu structureTimer CopyReset OverviewCurrent day All weekTo lower the cutting height Cutting heightTo increase the cutting height Alarm SecurityFunction Low Medium High Time lockChange PIN code New loop signalCustom Advanced Fault messagesMessages Weather timer Reset messagesWeather timer Info messagesExample InstallationCutting time Guide Guide 1 delay Guide Guide 2 delayGuide Boundary loopOverview Test Setting RangeCharging station range Lawn coverage AreaArea X How often? Area 1-5 How?Area X How far? GPS This section does not apply to AutomowerReset Reset Current areaReset All areas Lawn coverage How far?Corridor width Corridor width BoundaryCorridor width Guide Exit anglesExit angles Sectors Reversing distanceAutomatic passage handling Drive past wireInstallation shape Profiles SettingsSave settings to a Profile Check New loop signal, See 6.5 Security on page 45 Change the name of a profileUse a Profil One Automower for several gardensSpiral cutting Spiral cuttingCutting height calibration Time & DateCountry Select Reset all user settings in the menu and press OK Calibration of guide wireReset all user settings Mower house AccessoriesHeadlight Installation proposals and settings Garden examplesInstallation proposals and settings Lawn coverageFind charging StationGuide 1 Proportion 40% Guide 1 Proportion 60%As the GPS assisted navigation 3012-978 3018-095 Secondary area mode on Maintenance Charging station Winter storageRobotic lawnmower Winter service CleaningAfter winter storage Chassis and blade discTransport and moving Event of a thunderstormChassis WheelsBattery BladesTroubleshooting Fault messagesTroubleshooting Troubleshooting Info messages Indicator lamp in the charging station Light Cause ActionSymptoms Lawnmower runs, but Blade disc doesNot rotate Lawnmower mowsFinding breaks in the loop wire 3012-1208 3018-053 3018-055 Technical Data DataGuarantee terms Environmental information EC Declaration of Conformity EN 61000-6-3 emission EN 61000-6-1 immunityOriginal Instructions