Husqvarna 330X, 320 Cutting height, To increase the cutting height, To lower the cutting height

MENU FUNCTIONS

6.4 Cutting height

The cutting height can be varied from MIN (2 cm) to MAX (6 cm).

During the first week after a new installation, the cutting height must be set to MAX to avoid damaging the loop wire. After this, the cutting height can be reduced one step every week until the desired cutting height has been reached.

If the grass is long, allow the robotic lawnmower to start mowing at the MAX cutting height. Once the grass is shorter, the cutting height can be gradually lowered.

To increase the cutting height:

1.Use the up arrow key to increase to the required height

2.Press OK to confirm.

To lower the cutting height:

1.Use the down arrow key to lower to the required height.

2.Press OK to confirm.

Cutting height

Cutting height

3012-1237

English - 44