INTRODUCTION AND SAFETY
Maintenance
WARNING
When the robotic lawnmower is turned upside down the main switch must always be in the 0 position.
The main switch should be set in the 0 position during all work on the mower’s chassis, such as cleaning or replacing the blades.
Inspect the robotic lawnmower each week and replace any damaged or worn parts. The following must be carried out in the weekly inspections:
•Clean the charging station from grass, leaves, twigs and other objects that may impede the robotic lawnmower from docking with the charging station.
•Set the main switch to position 0 and put on a pair of protective gloves. Turn the robotic lawnmower upside down. Check the following:
1.Clean the drive wheels. Grass in the drive wheels can impact on how the lawnmower works on
slopes.
2. Clean the front wheels. Grass on the front wheels and the front wheel axles can affect performance.
3. Clean the body, chassis and cutting system. Grass, leaves and other objects that weigh down the product affect performance.
4. Check that all mower blades are intact. Check also that the mower blades can pivot freely. Even if the mower blades are intact, they must be replaced on a regular basis for the best mowing result and low energy usage. Replace all blades and screws at the same time if necessary so that the rotating parts are kept balanced. See 8.7 Blades on page 74.
English - 8