Husqvarna 330X, 320 Change the name of a profile, Use a Profil, One Automower for several gardens

Page 62

MENU FUNCTIONS

Change the name of a profile

The names of the profiles can be changed, to make it easier to remember what settings are stored in the respective profile.

•Check the profile name to be changed

•Press OK

•Check Rename and press OK.

•Move the cursor withe the arrow keys. Press OK to select a letter. Press BACK to save the new name.

•The names of the profiles will be shown in the menu Settings - Profiles. The name of the selected profile is also visible on the start page.

Use a Profil

To activate and use a profile, and thus use the saved settings, the following action must be taken.

•Check the profile to activate.

•Press OK.

•Check Use and press OK.

The robotic lawnmower will now use the settings stored in the profile.

One Automower® for several gardens

The unique connection between the mower and the charging station is saved in the profiles. This enables up to three charging stations to be connected to the same robotic lawnmower.

To connect a new charging station to the robotic lawnmower:

•First save a profile to be used with the original charging station.

•Then set the mower in the new charging station that will be connected to the mower.

•Check New loop signal, See 6.5 Security on page 45

•Save a profile for the new charging station.

To use the robotic lawnmower in the original charging station, the first profile must now be selected. To use the robotic lawnmower in the new charging station, that profile must be selected.

For optimal function, the GPS assisted navigation should be switched off for all extra installations and only be used on the main installation. To switch off the GPS assisted navigation, See 6.8 Installation on page 49.

3012-575

3012-576

English - 60

Image 62

Contents Husqvarna Automower 320/330X OPERATOR’S Manual Page Guarantee terms Introduction and safety TroubleshootingTechnical Data Garden examples MaintenanceMEMO Introduction and safety IntroductionSymbols on the product Symbols in the Operator’s Manual Text Important Information TextSafety instructions UseMoving Maintenance Presentation What is what? Numbers in the illustration representCapacity Package contentFunction Mowing technique Working methodSearch method 1 Irregular Movement patternFinding the charging station Search method 2 Follow guide wire Search method 3 Follow boundary wirePreparations InstallationSee 7 Garden examples on page 65 for installation examples Installation of the charging station Best charging station location3012-559 Connecting the transformer Installing and connecting the charging station Do not tread or walk on the charging station’s plateCharging the battery Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries Boundaries within the working area Secondary areasPassages when mowing SlopesLaying the boundary wire Laying the boundary wire in towards the charging Station Splicing the boundary wireConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire 135º 90º 3018-061 3012-953 3012-954 3018-055 Checking the installation Use Memo on page 2 to make a note of the PIN code First start-up and calibrationTest docking with the charging station Charging a flat battery UseUsing the timer StartingStopping Switching offAdjusting the cutting height Control panel Secondary area Operation selection StartMain area Operation selection Parking Main switch Charging station’s Park buttonBrowse between menus Menu functionsMain menu Number seriesTimer Menu structureTimer CopyCurrent day ResetOverview All weekTo lower the cutting height Cutting heightTo increase the cutting height Function Low Medium High AlarmSecurity Time lockChange PIN code New loop signalCustom Advanced Fault messagesMessages Weather timer Weather timerReset messages Info messagesExample InstallationCutting time Guide Guide Guide 1 delayGuide Guide 2 delay Boundary loopOverview Test Setting RangeCharging station range Lawn coverage AreaArea X How often? Area 1-5 How?Area X How far? GPS This section does not apply to AutomowerReset All areas ResetReset Current area Lawn coverage How far?Corridor width Corridor width BoundaryExit angles Sectors Corridor width GuideExit angles Reversing distanceAutomatic passage handling Drive past wireInstallation shape Profiles SettingsSave settings to a Profile Use a Profil Check New loop signal, See 6.5 Security on page 45Change the name of a profile One Automower for several gardensSpiral cutting Spiral cuttingCutting height calibration Time & DateCountry Select Reset all user settings in the menu and press OK Calibration of guide wireReset all user settings Mower house AccessoriesHeadlight Installation proposals and settings Garden examplesFind charging Installation proposals and settingsLawn coverage StationGuide 1 Proportion 40% Guide 1 Proportion 60%As the GPS assisted navigation 3012-978 3018-095 Secondary area mode on Maintenance Charging station Winter storageRobotic lawnmower After winter storage Winter serviceCleaning Chassis and blade discChassis Transport and movingEvent of a thunderstorm WheelsBattery BladesTroubleshooting Fault messagesTroubleshooting Troubleshooting Info messages Indicator lamp in the charging station Light Cause ActionSymptoms Not rotate Lawnmower runs, butBlade disc does Lawnmower mowsFinding breaks in the loop wire 3012-1208 3018-053 3018-055 Technical Data DataGuarantee terms Environmental information EC Declaration of Conformity EN 61000-6-3 emission EN 61000-6-1 immunityOriginal Instructions