Husqvarna 320, 330X manual Moving

Page 9

INTRODUCTION AND SAFETY

•Husqvarna AB does not guarantee full compatibility between the robotic lawnmower and other types of wireless systems such as remote controls, radio transmitters, hearing loops, underground electric animal fencing or similar.

Moving

The original packaging should be used when transporting the robotic lawnmower over long distances.

To safely move from or within the working area:

1. Press the STOP button to stop the robotic lawnmower. If security is set to the medium or high level (see 6.5 Security on page 45.) the PIN code has to be entered. The PIN code has four digits and is chosen when the robotic lawnmower is started for the first time, see 3.8 First start-up and calibration on page 32.

2. Set the main switch to position 0.

3.Carry the robotic lawnmower by the handle found at the rear of the product. Carry the robotic lawnmower with the blade disc away from the body.

IMPORTANT INFORMATION

Do not lift the robotic lawnmower when it is parked in the charging station. It can damage the charging station and/or the robotic lawnmower. Press STOP and instead first pull the robotic lawnmower out of the charging station before lifting it.

3012-1044

3012-1060

3012-1203

English - 7

Image 9

Contents Husqvarna Automower 320/330X OPERATOR’S Manual Page Technical Data Introduction and safety TroubleshootingGuarantee terms Garden examples MaintenanceMEMO Introduction Introduction and safetySymbols on the product Text Important Information Text Symbols in the Operator’s ManualUse Safety instructionsMoving Maintenance Presentation Numbers in the illustration represent What is what?Package content FunctionCapacity Working method Mowing techniqueMovement pattern Finding the charging stationSearch method 1 Irregular Search method 3 Follow boundary wire Search method 2 Follow guide wireInstallation See 7 Garden examples on page 65 for installation examplesPreparations Best charging station location Installation of the charging station3012-559 Connecting the transformer Do not tread or walk on the charging station’s plate Installing and connecting the charging stationCharging the battery Plan where to lay the boundary wire Installation of the boundary wireWorking area boundaries Secondary areas Boundaries within the working areaSlopes Passages when mowingLaying the boundary wire Splicing the boundary wire Laying the boundary wire in towards the charging StationConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire 135º 90º 3018-061 3012-953 3012-954 3018-055 Checking the installation First start-up and calibration Test docking with the charging stationUse Memo on page 2 to make a note of the PIN code Use Charging a flat batteryStarting Using the timerSwitching off Adjusting the cutting heightStopping Control panel Operation selection Start Main areaSecondary area Operation selection Parking Charging station’s Park button Main switchMain menu Menu functionsBrowse between menus Number seriesMenu structure TimerCopy TimerOverview ResetCurrent day All weekCutting height To increase the cutting heightTo lower the cutting height Security AlarmFunction Low Medium High Time lockNew loop signal CustomChange PIN code Fault messages MessagesAdvanced Reset messages Weather timerWeather timer Info messagesInstallation Cutting timeExample Guide Guide 2 delay Guide Guide 1 delayGuide Boundary loopSetting Range Charging station rangeOverview Test Area Lawn coverageArea 1-5 How? Area X How far?Area X How often? This section does not apply to Automower GPSReset Current area ResetReset All areas Lawn coverage How far?Corridor width Boundary Corridor widthExit angles Corridor width GuideExit angles Sectors Reversing distanceDrive past wire Installation shapeAutomatic passage handling Settings Save settings to a ProfileProfiles Change the name of a profile Check New loop signal, See 6.5 Security on page 45Use a Profil One Automower for several gardensSpiral cutting Spiral cuttingTime & Date CountryCutting height calibration Calibration of guide wire Reset all user settingsSelect Reset all user settings in the menu and press OK Accessories HeadlightMower house Garden examples Installation proposals and settingsLawn coverage Installation proposals and settingsFind charging StationGuide 1 Proportion 60% As the GPS assisted navigationGuide 1 Proportion 40% 3012-978 3018-095 Secondary area mode on Maintenance Winter storage Robotic lawnmowerCharging station Cleaning Winter serviceAfter winter storage Chassis and blade discEvent of a thunderstorm Transport and movingChassis WheelsBlades BatteryFault messages TroubleshootingTroubleshooting Troubleshooting Info messages Light Cause Action Indicator lamp in the charging stationSymptoms Blade disc does Lawnmower runs, butNot rotate Lawnmower mowsFinding breaks in the loop wire 3012-1208 3018-053 3018-055 Data Technical DataGuarantee terms Environmental information EN 61000-6-3 emission EN 61000-6-1 immunity EC Declaration of ConformityOriginal Instructions