MENU FUNCTIONS
Drive past wire
The front of the robotic lawnmower always passes the boundary wire by a specific distance before the mower turns around. The default distance is 31 cm, but this can be changed if required. A figure between 20 and 50 can be selected.
Note that the distance given is only an approximate value and should be regarded as a guide. In reality, the actual distance the robotic mower passes the boundary wire can vary.
Specify the number of centimetres you want the robotic lawnmower to pass the boundary wire and press OK.
Installation shape
The robotic lawnmower can be set for one of three garden shapes: Open, Normal and Complex.
This setting affects how the robotic lawnmower covers a working area when it mows.
• Open
Suitable in a working area consisting of a large open lawn area with few obstacles and no passages or when the mowing result is uneven in steep slopes.
• Normal
Suitable for most working areas. Designed for working areas with a moderate number of obstacles and/or passages.
• Complex
Suitable in working areas with many obstacles and/or passages.
Automatic passage handling
Automatic passage handling means that the mower itself regulates the distance (corridor width) from which it follows the guide wires. If Automatic passage handling is deactivated, the corridor width settings must be done manually to let the robotic lawnmower get through all the passages in the garden.
The factory setting is that Automatic passage handling is enabled.
English - 58