3Com 09-1324-000 manual Conventions, List conventions that are used throughout this guide

2ABOUT THIS GUIDE

■Appendix A describes how to boot a NETBuilder II system with a CEC 20 from the network using TFTP and Appendix B has instructions on how to obtain technical support.

Conventions	Table 1 and Table 2 list conventions that are used throughout this guide.
	Table 1	Notice Icons
	Icon	Notice Type		Alerts you to...
		Information note		Important features or instructions
		Caution		Risk of personal safety, system damage, or loss of data
		Warning		Risk of severe personal injury
	Table 2	Text Conventions
	Convention		Description
	Syntax		Evaluate the syntax provided and supply the appropriate values.
			Placeholders for values you must supply appear in angle brackets.
			Example:
			Enable RIPIP using:
			SETDefault !<port> -RIPIP CONTrol = Listen
			In this example, you must supply a port number for <port>.
	Commands		Enter the command exactly as shown in text and press the Return or
			Enter key. Example:

	To remove the IP address, enter:
	SETDefault !0 -IP NETaddr = 0.0.0.0
	This guide always gives the full form of a command in uppercase and
	lowercase letters. However, you can abbreviate commands by
	entering only the uppercase letters and the appropriate value.
	Commands are not case-sensitive.
Screen displays	This typeface represents information as it appears on the screen.
The words “enter”	When you see the word “enter” in this guide, you must type
and “type”	something, and then press the Return or Enter key. Do not press the
	Return or Enter key when an instruction simply says “type.”
[Key] names	Key names appear in text in one of two ways:
	■ Referred to by their labels, such as “the Return key” or “the
	Escape key”
	■ Written with brackets, such as [Return] or [Esc].
	If you must press two or more keys simultaneously, the key names
	are linked with a plus sign (+). Example:
	Press [Ctrl]+[Alt]+[Del].
Menu commands	Menu commands or button names appear in italics. Example:
and buttons	From the Help menu, select Contents.
Words in italicized	Italics emphasize a point or denote new terms at the place where
type	they are defined in the text.
Words in bold-face	Bold text denotes key features.
type