3Com 3C905C-TX-M, 3C905C-TX manual Connecting to the Network

Connecting to the Network 25

To connect the 3C905C NIC to a 10 Mbps Ethernet or

100 Mbps Fast Ethernet network:

1Plug the RJ-45 connector on the twisted-pair network cable into the RJ-45 port on the NIC backplate (see Figure 4).

Figure 4 Connecting to the RJ-45 Port

TX Data
ACT
10	L
	N
100	K

RJ-45 connector

2Connect the other end of the network cable to an active network port.

The next step is to install the NIC driver and software.

Go to the appropriate chapter for your operating system.