3Com 3C905C-TX-M, 3C905C-TX Insert the Windows 98 CD or diskette, and then click OK, Click Finish

Installing the Driver 31

3Select Search for the best driver for your device (Recommended), and then click Next.

4Select Floppy disk drives, and then click Next. Windows finds the driver file for the device.

5Click Next. Files are copied.

If the Insert Disk dialog box appears, prompting you to insert EtherDisk diskette 1, click OK.

You are prompted for EtherDisk diskette 2.

6Remove EtherDisk diskette 1 from drive A, insert EtherDisk diskette 2, and then click OK.

Files are copied. You are prompted for the Windows 98 CD.

7Insert the Windows 98 CD or diskette, and then click OK.

If you do not have the Windows 98 CD or diskette, but the Windows 98 installation files are on your hard drive, click OK. Enter the directory in the Copy Files From entry box (usually C:\WINDOWS\OPTIONS\CABS), and then click OK.

Files are copied. You are prompted for EtherDisk diskette 2.

8Make sure that EtherDisk diskette 2 is in drive A, and then click OK.

Files are copied.

9Click Finish.

You are prompted to restart the PC.

10Remove EtherDisk diskette 2 from drive A, and then click Yes to restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to “Verifying Successful Installation” later in this chapter to confirm that the NIC is properly installed.

After Windows restarts, double-click the Network icon in the Windows Control Panel and make sure that the configuration settings are properly set for your network environment. Contact your system administrator

for assistance.