Installing the Driver | 33 |
8Remove EtherDisk diskette 1 from drive A, insert EtherDisk diskette 2, and then click OK.
Files are copied. The Adapters tab of the Network screen appears. The name of the installed NIC appears in the list of network adapters.
9Click Close.
■If the Microsoft TCP/IP Properties screen appears, enter the requested information for your network environment. Refer to your system administrator or the Windows NT documentation for assistance.
■If the Microsoft TCP/IP Properties screen does not appear, the installation is complete.
10Remove EtherDisk diskette 2 from drive A, and then restart the PC.
The installation is complete. Go to “Verifying Successful Installation” later in this chapter to confirm that the NIC is properly installed.
Windows NT 3.51
If you encounter problems during the installation, see the WINNT.TXT file located in the HELP directory on EtherDisk diskette 3 for troubleshooting tips.
Before installing the NIC driver and software:
■Make sure that you have run the preinstallation program, as described in Chapter 2.
■Make sure that the NIC is installed in the PC and that it is connected to the network.
To install the NIC driver and software on a PC running Windows NT 3.51:
1Turn on the power to the PC.
2In the Main window of the Program Manager,
The Network Settings window (Figure 6) appears.
