3Com 3C905C-TX-M, 3C905C-TX manual Insert the Windows 95 CD or diskette, and then click OK

Installing the Driver 29

3In the specified fields of the Identification tab screen, enter the following information, and then click OK:

■Computer Name — Identifies the PC on the network for other users. This entry must be a unique name of 15 characters or fewer, containing no spaces.

■Workgroup — Identifies the group (for example, your department name) to which your PC belongs. If you belong to a peer-to-peer network, this entry must be exactly the same for all the PCs in your network.

■Computer Description — Displays additional details to other users on the network about this PC. For example, you could specify that the PC has a printer attached. Filling in this field is optional.

4Insert the Windows 95 CD or diskette, and then click OK.

If you do not have the Windows 95 CD or diskette, but the Windows 95 installation files are on your hard drive, click OK. Enter the directory in the Copy Files From entry box (usually C:\WINDOWS\OPTIONS\CABS), and then click OK.

Files are copied. You are prompted for EtherDisk diskette 2.

5Make sure that EtherDisk diskette 2 is in drive A, and then click OK.

Files are copied. You are prompted to restart the PC.

6Remove EtherDisk diskette 2 from drive A, and then click Yes to restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to “Verifying Successful Installation” later in this chapter to confirm that the NIC is properly installed.

After Windows restarts, double-click the Network icon in the Windows Control Panel and make sure that the configuration settings are properly set for your network environment. Contact your system administrator

for assistance.