42CHAPTER 4: NETWARE CLIENT AND SERVER DRIVER INSTALLATION
3Add the following two lines to the AUTOEXEC.NCF file: load C:\NWSERVER\3C90X.LAN slot=<slot> NAME=<name> FRAME=<frametype>
bind ipx to <name> net=<number>
4Save and exit the file, and then reboot the server.
NetWare 4.10 and 4.11
To install the driver in a NetWare 4.10 or 4.11 server:
1Install the NetWare server software. The NIC Selection menu appears.
2Press Enter to display a list of NIC drivers.
3Press Insert to install an unlisted driver.
4Insert EtherDisk diskette 3 in your PC, and then press Enter.
5Press Enter after the driver is loaded.
6Save parameters and continue the installation.
Multiple NICs
To support more than one NIC in a NetWare server, change the AUTOEXEC.NCF file to the following format:
load C:\NWSERVER\3C90X.LAN slot=<slot1> NAME=<name1> FRAME=<frametype1>
bind ipx to <name1> net=<net1>
load C:\NWSERVER\3C90X.LAN slot=<slot2> NAME=<name2> FRAME=<frametype2>
bind ipx to <name2> net=<net2>
The values <slot1> and <slot2> are the numbers of the PCI slots in which the NICs are physically installed. To view the numbers of these PCI slots, use the 3Com Configuration and Diagnostic program for DOS. See the next section, “Verifying the PCI Slot Number,” for instructions.
