30CHAPTER 3: WINDOWS 95/98 AND WINDOWS NT DRIVER INSTALLATION

Windows 98

If you encounter problems during the installation, see the WIN98.TXT file located in the HELP directory on EtherDisk diskette 3 for troubleshooting tips.

Before installing the NIC driver and software:

Make sure that you have run the preinstallation program, as described in Chapter 2.

Make sure that the NIC is installed in the PC and that it is connected to the network.

Make sure that you have the Windows 98 installation files. These files may be on a CD or diskettes, or they may have been copied to your hard drive when Windows 98 was installed on your PC.

To install the NIC driver and software on a PC running Windows 98:

1Turn on the power to the PC.

Windows 98 detects the NIC. The Add New Hardware Wizard (Figure 5) starts.

Figure 5 Add New Hardware Wizard

2Insert EtherDisk diskette 1 in drive A, and then click Next.

Page 30
Image 30
3Com 3C905C-TX manual Turn on the power to the PC, Insert EtherDisk diskette 1 in drive A, and then click Next