B

DYNAMICAccess

SOFTWARE INSTALLATION

 

AND CONFIGURATION

This chapter explains how to install and configure DynamicAccess software on a PC running Windows 95, Windows 98, or Windows NT.

For an overview of DynamicAccess software, see

Chapter 1. For detailed information on using, configuring, and troubleshooting DynamicAccess software, access the DynamicAccess Software User Guide from the

3Com World Wide Web site:

http://www.3com.com/dynamicaccess

Client PC Requirements

DynamicAccess software can be installed on a PC running Windows 95, Windows 98, Windows NT 4.0, or Windows NT 3.51.

CAUTION: If you plan to install DynamicAccess software on a multiprocessor PC running Windows NT 4.0, Service Pack 4, you must first download and install the appropriate Microsoft patch available at:

http://www.3com.com/dynamicaccess/hotfixes

Failure to install the patch will result in system failure.

Table 12 lists the minimum client requirements and recommended Microsoft Service Packs (if any) for the version of DynamicAccess software that is included with the 3C905C NIC on EtherDisk diskette 2.

Page 73
Image 73
3Com 3C905C-TX-M, 3C905C-TX manual Configuration, Client PC Requirements