Installing the NetWare Server Driver | 43 |
The values <name1> and <name2> are unique names assigned to each NIC by your system administrator. The values <name1> and <name 2> must be different.
The frame parameters <frametype1> and <frametype2> can be one of the following:
■Ethernet_802.2
■Ethernet_802.3
■Ethernet_II
■Ethernet_SNAP
Make sure that the frametype for the server and the workstation is the same. For example, if the server uses Ethernet_802.2, the workstation must also use Ethernet_802.2.
The values <net1> and <net2> are unique numbers assigned by the system administrator to each NIC. Make sure that <net1> and <net2> are different numbers.
See the appropriate Novell NetWare manuals for further information.
Verifying the PCI Slot Number
To verify the PCI slot number in which a NIC is installed:
1Reboot to a DOS prompt.
2Insert EtherDisk diskette 3 in drive A.
3Change to the A:\> prompt, and enter:
3c90xcfg.exe
The Selected NIC screen (Figure 7) of the 3Com Configuration and Diagnostic Program for DOS appears.
