3D Innovations DLT8000 7$3($/(57/2*3$5$0(7(56

7DQGEHUJ'DWD 6&6,&RPPDQGV
 7DQGEHUJ'/73URGXFW0DQXDO
/2*6(16(&RPPDQG'KFRQWLQXHG
7$3($/(57/2*3$5$0(7(56
Bit
Byte
76543210
5 –1
to
5
(MSB)
Parameter Code ( )
(LSB)
5 + 1 DU DS TSD ETC TMC Rsv’dLP
5 + 2 Parameter Length (1)
5 + 3 Value of TapeAlert Flag (Flag is set when Bit 0 = 1; Bits 1 – 7 are Reserved)
)LJXUH±/RJ3DUDPHWHUV)RUPDWIRU7DSH$OHUW3DJH
)LHOG1DPH 'HVFULSWLRQ
Parameter Code This field contains the Flag code. See Table 5-26 for the supported
Flags, level of severity, and the Flags’ definitions.
Parameter Length This field is set to 1.
Value of Tape Alert
Flag If Bit 0 is set to 1, indicates that TapeAlert has sensed a problem. See Table 5-26 for the supported Flags and their definitions. If Bit 0
is 0, the Flag is not set and no problem has been sensed.
7DEOH±/RJ3DUDPHWHU)LHOG'HVFULSWLRQVIRU7DSH$OHUW3DJH
For definitions of bits that make up the Control Byte (the byte “5n + 1”
above), refer to Section 5.8.3, Table 5-21.