7DQGEHUJ'DWD 6&6,&RPPDQGV
 7DQGEHUJ'/73URGXFW0DQXDO
/2*6(16(&RPPDQG'KFRQWLQXHG
)LHOG1DPH 'HVFULSWLRQ
Parameter Value Parameter Codes 0000h through 0005h are supported.
Code Description
0000h Specifies device type. For sequential-type devices such
as tape drives, the value is always 00010000h.
0001h Specifies device cleaning-related status. See Figure 5-30.
0002h Specifies the number of “loads” over the lifetime of the
tape drive.
0003h Specifies the number of cleaning sessions per cartridge.
0004h Vendor-unique
0005h Drive Temperature in degreesC
DU Disable Update. Always 0.
DS Disable Save. Not supported. This bit always set to 1.
TSD Target Save Disable. When = 0, indicates that the target provides a
target-defined method for saving log parameters. When = 1,
indicates that either the target does not provide a defined method for
saving log parameters or that the target-defined method has been
disabled by the initiator.
ETC Enable Threshold Comparison. Threshold checking is not supported
on this page. Always set to 0.
TMC Threshold Met Criteria. Always 0.
LP List Parameter. Always set to 0 (parameter codes treated as data
counter).
7DEOH±/RJ3DUDPHWHUVIRU'(9,&(67$786/2*6(16(3DJH)LHOG'HVFULSWLRQV
Bit
Byte
76543210
0 Reserved ClnR ClnQ ClnEx
1 - 3
(MSB)
Reserved
(LSB)
)LJXUH±/RJ3DUDPHWHUV)RUPDWIRU'(9,&(67$786/2*6(16(3DJH3DUDPHWHUK&OHDQLQJ5HODWHG