7DQGEHUJ'DWD 6&6,&RPPDQGV
 7DQGEHUJ'/73URGXFW0DQXDO
02'(6(/(&7&RPPDQGKKFRQWLQXHG
)LHOG1DPH 'HVFULSWLRQ
PS Parameters Savable. For MODE SELECT, this bit must be 0.
Page Length The Page Length field indicates the number of bytes in the Control
Mode Page that follow this byte. The valid value for this byte is 06h.
RLEC Report Log Exception Condition. When set to 1, specifies that the
target will report log exception conditions. When 0, specifies that the
target will not report log exception conditions.
The RLEC bit works in conjunction with the READ / WRITE Error
Log Sense Page, specifically, the TMC bit of the READ / WRITE
Error Log SENSE Page (Page 2 and 3), described earlier in this
manual.
The RLEC bit indicates whether the drive should return CHECK
CONDITION status with sense key set to UNIT ATTENTION when
one of the READ and WRITE error counters of the log pages reach
a specified threshold . Thresholds can be modified using LOG
SELECT.
Queue Algorithm
Modifier Must be 0.
Qerr Queue Error. Must be 0.
DQue Disable Queuing. Must be 0.
EECA Enable Extended Contingent Allegiance. Not supported; must be 0.
RAENP Ready Asynchronous Event Notification. Not supported; must be 0.
UAAENP Unit Attention Asynchronous Event Notification. Not supported; must
be 0.
EAENP Enable AEN Permission. Asynchronous event notification is not
supported; must be 0.
Ready AEN Holdoff
Period Not supported; must be 0.
7DEOH±&RQWURO0RGH3DJH'HVFULSWRU²)LHOG'HVFULSWLRQV