7DQGEHUJ'DWD 6&6,&RPPDQGV
 7DQGEHUJ'/73URGXFW0DQXDO
 5(3257'(16,7<6833257&RPPDQGK
The REPORT DENSITY SUPPORT command is a 10-byte command used to
request that information about the densities supported by the logical unit be sent to
the application client. Note that a reservation conflict will occur when a REPORT
DENSITY SUPPORT command is received from any initiator other than the one
holding a logical unit reservation.
The figure below illustrates the format of the REPORT DENSITY SUPPORT
command; the table that follows explains the data fields of the command.
Bit
Byte
76543 2 1 0
0 Operation Code (44h)
1 Reserved Media
2 - 6 Reserved
7 – 8 (MSB) Allocation Length (LSB)
9 Unused Reserved Flag Link
)LJXUH±5(3257'(16,7<6833257&RPPDQG'HVFULSWRU%ORFN²'DWD)RUPDW