Acer 7730 manual Replacing the LCD assembly, To replace the LCD assembly

Replacing the LCD assembly

Tools you need to complete this task:

v

Flat-blade driver - OR -

Phillips #0 screwdriver

Screws removed during this task:

2 black M2.5×5	2 black M2.5×6.5
(Keyboard cover)	(Hinge-bottom)

Scribe or non-marring

4 black M2.5×6.5 (Hinge-top)

To replace the LCD assembly:

1Complete the steps in “Preparing the notebook” on page 55.

2Open the memory bay by following the steps in “Adding or replacing memory modules” on page 57.

3Open the wireless bay by following the steps in “Replacing the IEEE 802.11 wireless card” on page 67.

4If the notebook has wireless networking built in, unplug the wireless antennas by following the steps in “Replacing the IEEE 802.11 wireless card” on page 67.

5Taking care to note the cables’ routing and positions as they are installed from Acer, slide the antenna cables out of the wireless bay.

84 Chapter 3: Replacing notebook components