Manuals / Actiontec electronic / Computer Equipment / Network Router

Actiontec electronic MI424-WR LAN Connection Failure, Ensure the Subnet Mask address is set to

Models: MI424-WR

1 179

Download 179 pages 51.83 Kb

Page 153

Actiontec Wireless Broadband Router User Manual

LAN Connection Failure

•Ensure the Router is properly installed, the LAN connections are correct, and the power is on.

•Confirm the computer and Router are on the same network segment. If unsure, let the computer get the IP address automatically by initiating the DHCP function, then verify the computer is using an IP address within the default range (192.168.1.2 through 198.168.1.254). If the computer is not using an IP address within the range, it will not connect to the Router.

•Ensure the Subnet Mask address is set to 255.255.255.0.

Time out error occurs when entering a URL or IP Address

•Verify all the computers are working properly.

•Ensure the IP settings are correct.

•Ensure the Router is on and connected properly.

•Verify the Router’s settings are the same as the computer.

I’ve run out of Ethernet ports on my Router. How do I add more computers?

Plugging in an Ethernet hub or switch expands the number of ports on the Router. Run a standard Ethernet cable from the “Uplink” port of the new hub or switch to a yellow Ethernet port on the Router.

How do I change the password on the Router’s Graphic User Interface?

From the Router’s GUI Home screen, click Advanced, then Users. From the “Users” screen, click Administrator, which generates the “User Settings” screen. In the “General” section of the screen, change the password.

Is the wireless option on by default on the Router?

Yes. The Router’s wireless option is activated out of the box.

Is the wireless security on by default when the wireless option is activated?

Yes, with a unique 64-bit WEP (Wired Equivalent Privacy) key for each unit.

Which connection speeds does the Router support?

The Ethernet Internet connection supports 100 Mbps. The 802.11g wireless con- nection supports up to 54 Mbps (depending on signal quality, etc.). The MoCA connection supports 270 Mbps.

148

Image 153

Actiontec electronic MI424-WR user manual LAN Connection Failure, Ensure the Subnet Mask address is set to

Contents

Wireless Broadband Router Table of Contents Using Advanced Settings 109 Using Parental Controls 101Troubleshooting 147 Quality of Service 151 Monitoring the Router 143 Specifications 167 Limited Warranty 171169 This page left intentionally blank Introduction1 Package Contents Features Wall-mount template Vertical stand WarrantyMinimum System Requirements Intrusion detection MAC address filtering Getting to Know the Router Power Light Ethernet WAN Light Wireless LightCoax WAN Light Internet Light Reset Button Rear PanelCoax Port Power switch powers the Router on and off Power SwitchPower Port Ethernet WAN Port This page left intentionally blank Setting Up the Router Connecting Router Then press Enter on the keyboard Connecting the Router Router is now configured Ethernet Wireless Computer Network Configuration CoaxialWindows XP Windows Windows 98/MeWindows NT Linux Home Broadband Connection Quick LinksAction Zone Accessing My Network Configuring My Network Settings Using My Network Configuring My Network Settings Page Configuring My Network Settings Click Add. The Add Port Forwarding Rule screen appears Enable Application Configuring My Network Settings Page Configuring My Network Settings This page left intentionally blank Overview Creating a Wireless Network Channel Wireless Status Creating a Wireless Network Basic Security Settings Click Apply to save the settings Level 1 Wireless Security Advanced Security Settings Click Apply to save changes WEP 802.1X WEP Select the proper encryption algorithm Tkip or AES WPAPage Wireless MAC Authentication 802.11b/g Mode Advanced Wireless OptionsWhen should this rule occur? Network CTS Protection ModeTransmission Rate Beacon Interval Configuring a Wireless Windows XP Client Fragmentation ThresholdRTS Threshold Creating a Wireless Network Connecting a Wireless Windows XP Client Creating a Wireless Network Page Creating a Wireless Network This page left intentionally blank Using Network Connections Network Home/Office General Bridge Internet Protocol IP Address Distribution DNS Server Routing Ethernet Connection Routing TableAdditional IP Addresses General Ports Ethernet Switch Coax Connection General Password Enter the Coax Link password in this text box Coax LinkCoax Connection Status Broadband Ethernet Connection Configuring the Broadband Ethernet Connection Internet Protocol IP Address Distribution Routing Internet Connection Firewall Coax Broadband Connection Configuring the Coax Broadband Connection Password Enter the Coax Link password here WAN Coax Connection SpeedsThis section displays the Router’s Tx and Rx speeds in Mbps DNS Server Routing WAN PPPoE/WAN PPPoE General PPP Authentication PPP ConfigurationPPP session automatically ends PPP reconnect attempts, as provided by the ISP PPP Compression Internet Protocol Routing Table Configuring Router’s Security Page General Security Level Incoming traffic Network outgoing traffic Configured in the AccessLimited Only commonly Network from Internet Access Control Page Configuring the Router’s Security Port Forwarding Click Apply to save the changes DMZ Demilitarized Zone Host Port Triggering Configuring the Router’s Security Remote Administration Configuring the Router’s Security Website Blocking Click Apply to save changes Static NAT Advanced Filtering Page Configuring the Router’s Security Security Log Configuring the Router’s Security Page Configuring the Router’s Security Page Configuring the Router’s Security 100 Activating Parental Controls Using Parental Controls Creating a Filtering Policy Parental Controls Websites and URL Filtering 105 Advanced Options Statistics 108 Using Advanced Settings 110 111 Firmware Upgrade Automatically Check and Upgrade Upgrading From the InternetAutomatically Check and Send E-mail Firmware Restore Automatic Check DisabledManual Checking and Upgrading Configuration File System Settings Prompt for Password When Accessing via LAN Wireless Broadband Router’s HostnameWarn User Before Network Configuration Changes Local Domain Low Capacity Notification Enabled Enable LoggingAllowed Capacity Before Email Notification System Log Buffer Size Security Log Buffer Size Click in this check box to activate security loggingEnter the size of the security log buffer in this text box Server PPP Timeout Server Requires AuthenticationDhcp Timeout Port Date and Time Scheduler Rules 122 Routing 124 Domain Routing IP Address Distribution 126 127 128 Diagnostics Reboot the Router Restoring Default Settings MAC Cloning ARP Address Resolution Protocol Table Users QoS Local Administration Dynamic DNS Password Connection To UpdateOffline User Name DNS Server Backup MXHost Name Wildcard 137 Network Objects Universal Plug and Play UPnP 140 141 Protocols 142 Router Status Monitoring Router System Log Connection Monitoring Traffic Monitoring Troubleshooting Accessing the Router if Locked OutRestoring the Router’s Default Settings Is the wireless option on by default on the Router? Time out error occurs when entering a URL or IP AddressLAN Connection Failure Ensure the Subnet Mask address is set to How do I find out what IP address my computer is using? Are the Router’s Ethernet ports auto-sensing?No. Follow these steps to refresh the IP address How many computers can be connected through the Router? What is the default user name for the Router? Quality of Service Traffic Priority802.1p Priority 323 Port triggering applications MSN Messenger/Windows Messenger Appendix a Quality of Service 154 Traffic Shaping 156 157 Name the new class and click Apply To define a shaping class 159 160 161 162 163 802.1p Settings 165 166 Specifications B Wireless Operating Range LED IndicatorsEnvironmental Regulatory Compliance Notices ModificationsClass B Equipment 170 171 Limited Warranty 172 Limited Warranty 174