Agilent Technologies B2201A, B2200A manual System subsystem

SYSTEM subsystem

SCPI Command Reference

Command Summary

:SYSTem subsystem is a collection of functions that are not related to instrument performance.

Command	Description
:SYST:BEEP state	Enables/disables the beeper.
	state: ON / 1 (enable) or OFF / 0 (disable)
:SYST:CCON? card_number	Returns the card configuration information. This command
	is just to keep compatibility with the Agilent E5250A.
	card_number: 1, 2, 3, or 4
:SYST:CDES? card_number	Returns a description of the specified card: model number
	and input/output port information.
	card_number: Card to check. 0 for Auto Config,
	1, 2, 3, or 4 for Normal Config.
:SYST:CPON card_number	Resets the specified card to the power-on state.
	card_number: 0 or ALL for Auto Config,
	1, 2, 3, 4, or ALL for Normal Config
:SYST:CTYP? card_number	Returns ID of the specified card: model number and
	revision.
	card_number: Card to check. 0 for Auto Config,
	1, 2, 3, or 4 for Normal Config.
:SYST:DISP:LCD state	Enables/disables the front panel LCD when the B2200 is
	in the GPIB remote mode. state: ON / 1 (enable) or OFF / 0
	(disable)
:SYST:DISP:LED state	Enables/disables the front panel LED.
	state: ON / 1 (enable) or OFF / 0 (disable)
:SYST:DISP:STR string	Specifies a string displayed on the LCD in the GPIB
	remote mode.
:SYST:ERR?	Reads error from head of error queue, and removes it from
	the queue.
:SYST:KLC state	Locks/unlocks the front panel keys.
	state: ON / 1 (lock) or OFF / 0 (unlock)
:SYST:MEMO:SAVE memory_number	Saves a setup information into the internal memory, or
:SYST:MEMO:LOAD memory_number	loads a setup information.
	memory_number: 1 to 8

Agilent B2200 User’s Guide, Edition 2 5-19