Agilent Technologies B2200A Invalid separator, Data type error, GET not allowed, Undefined header

Error Messages

Standard SCPI Error Messages

Error	Error Message and Description
Number
-103	Invalid separator
	An illegal character was received when a separator was expected; for
	example, the semicolon was omitted between multiple commands in
	a program message.
-104	Data type error
	An improper data type was received; for example, numeric data was
	expected but string data was received.
-105	GET not allowed
	A group execute trigger was received within a program message.
-108	Parameter not allowed
	Too many parameters for the command were received.
-109	Missing parameter
	Fewer parameters were received than required for the command.
-110	Command header error
	An error was detected in the header. This error message is reported if
	the B2200 cannot determine the more specific header errors -111
	through -114.
-111	Header separator error
	An illegal character for a header separator was received; for
	example, no white space between the command header and
	parameter.
-112	Program mnemonic too long
	A keyword in the command header contains more than twelve
	characters.
-113	Undefined header
	An undefined command header was received; for example, *XYZ or
	:ROUT:OPEN:COOD.

7-4 Agilent B2200 User’s Guide, Edition 2