Agilent Technologies B2200A, B2201A manual Switch Modules

Figure 1-3

WARNING

NOTE

Introduction

Switch Modules

Switch Modules

The Agilent B2200A and B2201A support the dedicated switch module, Agilent B2210A and B2211A, respectively.

By installing the modules, the module inputs will be connected internally to the front panel input connectors. And 12 output connectors will face the rear panel. The type of the output connectors is the triaxial BNC. Up to six kelvin outputs are available.

Image of the output terminals and the block diagram of the switch module are shown in Figure 1-3 and Figure 1-4.

Switch Module Output Terminals

Do not touch the force and guard terminals of the output connectors while the Agilent B2200 is turned on. Dangerous voltages up to the maximum input voltage may be present at the output connectors.

Mixed configuration of the switch modules is not supported.

1-8 Agilent B2200 User’s Guide, Edition 2